Safety Precautions

Definitive Technology BIPOLAR SUPERTOWER OWNER’S MANUAL

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. There are no user serviceable parts inside. Please refer all servicing to licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.

CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the user to uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of an exclamation point inside a triangle is intended to alert the user to the presence of important operat- ing, maintenance and servicing information in the manual accompanying the device.

CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert. Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.

CAUTION: Important Safety Instructions

WARNING: DO NOT OPERATE SPEAKER WITHOUT STABILIZER FEET INSTALLED

Accessories included in your Bipolar ST box:

1.Stabilizer Feet: Qty (4) BP-8080ST, BP-8060ST, and BP-8040ST; Qty (2) BP-8020ST

2.Philips Head Screws: Qty (8) BP-8080ST, BP-8060ST, and BP-8040ST; Qty (4) BP-8020ST

3. Carpet Spikes: Qty (4) all models

4. Hard Floor Glides: Qty (4) all models

Accessory Installation

*Definitive Technology is not responsible for damage to floors caused by misuse of the provided accessories.

Figure 1 – Stabilizer Feet

Stabilizer Feet and Screws

CAUTION! To reduce the risk of electrical shock, do not expose this equip- ment to rain or moisture.

Power Supply

Optional Carpet Spikes

1.Read Instructions—All safety and operating instructions should be read before operating the device.

2.Retain Instructions—The safety and operating instructions should be retained for future reference.

3.Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.

4.Follow Instructions—All operating and safety instructions should be followed.

5.Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.

6.Carts & Stands—The device should only be used on carts or stands rec- ommended by the manufacturer.

7.Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended by the manufacturer.

8.Ventilation—The device should always be located in such a way that it maintains proper ventilation.

It should never be placed in a built-in installation or anywhere that may impede the flow of air through its heat sink.

9.Heat—Never locate the device near heat sources such as radiators, floor

registers, stoves or other heat-generating devices.

10.Power Supply—The device should only be connected to a power supply of the type described in the operating instructions or as marked on the device.

11.Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or crushed by items placed on them or against them. Special attention should be paid to areas where the plug enters a socket or fused strip and where the cord exits the device.

12.Cleaning—The device should be cleaned in accordance with manufac- turer’s instructions.

13.Periods Of Non-Use—The device should be unplugged when not being used for extended periods.

14.Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside the device.

15.Damage Requiring Service—The device should be serviced by licensed technicians when:

•The plug or power supply cord has been damaged.

•Objects have fallen on or liquid has spilled inside the device.

•The device has been exposed to moisture.

•The device does not appear to be operating properly or exhibits a marked change in performance.

•The device has been dropped or the cabinet becomes damaged.

16.Service—The device should always be serviced by licensed technicians. Only replacement parts specified by the manufacturer should be used. The use of unauthorized substitutions may result in fire, shock, or other hazards.

1.The fuse and power disconnect device are located on the back of the speaker.

2.The disconnect device is the power cord, detachable at either the speaker or the wall.

Unpacking Your BP-8000 Super Tower

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage most likely occurred in handling after it left our plant and should be reported to your Definitive dealer or the delivery company that delivered your loudspeaker. Please unpack your system carefully. Save all cartons and packing materials in case you move or need to ship your system. Record the serial number found on the back of the Bipolar 8000ST speaker.

Positioning the Speakers in Your Room

Your new Bipolar speakers are very flexible in terms of positioning and placement. To optimize their performance, please follow these simple guidelines. Although the

following recommendations will usually yield the best results, all rooms and listen-
ing setsups are different,			> 4”
so do not be afraid to			> 4”
so do not be afraid to			(10 cm)
experiment with the			(10 cm)
experiment with the
speaker placement.	> 6”	B	6”
Whatever sounds best to	> 6”	B	6”
Whatever sounds best to	(30 cm)		(30 cm)
you is correct.	A		C
Figure 2 –
Positioning Bipolar
ST as Left/Right
Main Speakers
Set up the speakers and
listening position in an
equilateral triangle as
illustrated. You will also
get good results if the

listeners are a bit farther away. For example, if line A and C are each 10' long then line B would be between 7' and 8' long.