D-Link DSL-302G manual Install the USB Driver

Page 19

Install the USB Driver

To install the USB driver for a computer-attached configuration with a computer running a Windows operating system, follow the procedure below.

1.Plug the USB connector to the DSL-302G, then the Add New Hardware Wizard dialog box is displayed showing the type of USB device that has booted up:

2.Click on Next to continue. The following dialog box is displayed asking you to specify how to install the driver:

3.Ensure that the first option is selected and click on Next. The following dialog box is displayed asking you to specify where the driver can be found:

Image 19

Contents DSL-302G Adsl Ethernet/USB Modem User’s Guide Page Wichtige Sicherheitshinweise CE Mark Warning Table of Contents Page Before You Start VPI and VCI SettingsAbout This User’s Guide TerminologyPage Modem Description and Operation Modem FeaturesWhat is ADSL? IntroductionRear Panel Front PanelPacking List LED IndicatorsConnect Adsl Line Hardware InstallationConnect the Power Modem LocationInstall the Modem Configuration Utility Software InstallationPage Page Page Configure the Modem Page Install the USB Driver Page Installing the PC Ethernet Client Driver Page Configure the Ethernet Client Driver Click on the Internet Protocol item in the list box Modem Diagnostics Advanced Diagnostics Output Power measured in dBm Factory ResetData Transfer Rate Technical SpecificationsDSL-302G Firmware Upgrade Utility Page Product Type Warranty Period