D-Link DSL-302G manual

Page 22

4.Insert the PC Driver install disk.

5.Check the Floppy disk drive option and click on Next. The following dialog box is displayed which confirms that a suitable driver has been found on the floppy disk which will now be installed:

6.Click on Next to begin the installation of the driver.

7.You may be asked to insert the Windows installation CD-ROM that was supplied with your PC. If so, insert the CD and click on Next. When the installation has finished, the following dialog box is displayed:

Image 22

Contents DSL-302G Adsl Ethernet/USB Modem User’s Guide Page Wichtige Sicherheitshinweise CE Mark Warning Table of Contents Page Terminology VPI and VCI SettingsAbout This User’s Guide Before You StartPage Introduction Modem FeaturesWhat is ADSL? Modem Description and OperationFront Panel Rear PanelLED Indicators Packing ListModem Location Hardware InstallationConnect the Power Connect Adsl LineSoftware Installation Install the Modem Configuration UtilityPage Page Page Configure the Modem Page Install the USB Driver Page Installing the PC Ethernet Client Driver Page Configure the Ethernet Client Driver Click on the Internet Protocol item in the list box Modem Diagnostics Advanced Diagnostics Factory Reset Output Power measured in dBmTechnical Specifications Data Transfer RateDSL-302G Firmware Upgrade Utility Page Product Type Warranty Period