D-Link DSL-302G manual Configure the Ethernet Client Driver

Page 23

8.Click on the Finish button to complete the installation. The PC driver for the VVB Ethernet port is now installed.

9.You will be asked to restart your computer. Click on Yes to restart the computer.

After the reboot, the PC Driver for the Ethernet port will be fully installed.

Refer to the next section to configure the driver.

Configure the Ethernet Client Driver

To configure the Ethernet Client driver, follow the procedure below:

1.Choose Settings > Network and Dial-up Connections from the Start menu.

2.The Network and Dial-up Connections window is displayed.

3.Right-click on the Local Area connection icon in this window and choose Properties from the menu displayed. The Local Area Connection Properties dialog box is displayed:

Page 22 Page 24
Image 23
Page 22 Page 24
Contents DSL-302G Adsl Ethernet/USB Modem User’s Guide Page Wichtige Sicherheitshinweise CE Mark Warning Table of Contents Page Before You Start VPI and VCI SettingsAbout This User’s Guide TerminologyPage Modem Description and Operation Modem FeaturesWhat is ADSL? IntroductionRear Panel Front PanelPacking List LED IndicatorsConnect Adsl Line Hardware InstallationConnect the Power Modem LocationInstall the Modem Configuration Utility Software InstallationPage Page Page Configure the Modem Page Install the USB Driver Page Installing the PC Ethernet Client Driver Page Configure the Ethernet Client Driver Click on the Internet Protocol item in the list box Modem Diagnostics Advanced Diagnostics Output Power measured in dBm Factory ResetData Transfer Rate Technical SpecificationsDSL-302G Firmware Upgrade Utility Page Product Type Warranty Period
Top Page Image Contents