D-Link DSL-302G manual

Page 20

4.Insert the PC Driver install disk.

5.Check the Floppy disk drive option and click on Next. The following dialog box is displayed which confirms that a suitable driver has been found on the floppy disk which will now be installed:

6.Click on Next to begin the installation of the driver. When the installation has finished, the following dialog box is displayed:

7.Click on the Finish button to complete the installation. The PC Driver for the USB device is now installed.

Image 20

Contents DSL-302G Adsl Ethernet/USB Modem User’s Guide Page Wichtige Sicherheitshinweise CE Mark Warning Table of Contents Page VPI and VCI Settings About This User’s GuideTerminology Before You StartPage Modem Features What is ADSL?Introduction Modem Description and OperationFront Panel Rear PanelLED Indicators Packing ListHardware Installation Connect the PowerModem Location Connect Adsl LineSoftware Installation Install the Modem Configuration UtilityPage Page Page Configure the Modem Page Install the USB Driver Page Installing the PC Ethernet Client Driver Page Configure the Ethernet Client Driver Click on the Internet Protocol item in the list box Modem Diagnostics Advanced Diagnostics Factory Reset Output Power measured in dBmTechnical Specifications Data Transfer RateDSL-302G Firmware Upgrade Utility Page Product Type Warranty Period