DE-528CT Ethernet Adapter / User s Guide
Configuring DE-528CT
Choose Set Up New Configuration from the Main Menu dialog box, then the Set Up New Configuration Menu appears.
Run Diagnostics
Choose Run Diagnostics from the Main Menu dialog box, then the Run Diagnostics Menu appears which provides three testing levels:
EEPROM Test
This test verifies the mode and the register information on the
EEPROM.
On Board Diagnostics 4
To run this test, choose Run Diagnostics On Board from the Run Diagnostics Menu dialog box.
This is a series of tests designed to check Network Controller Registers,
Network Diagnostics
To run this test, choose Run Diagnostics On Network from the Run Diagnostics Menu dialog box.
This test verifies that the network cable is connected properly, sothat the adapter can send and receive data successfully.
This test requires two computers, the master computer and a second computer. The master computer, configured as the a data generator, generates and transmit packets. The second computer, configured as the data receiver, receives packets and transmits them back to the data generator.
4
The On Board Diagnostics test must be run before the Network Diagnostics test is run, in order to ensure the adapter
s basic functions are working properly.
Configuration and Diagnostics |