D-Link DE-528CT manual Specifications, Pci

Page 27

DE-528CT Ethernet Adapter / User s Guide

C

SPECIFICATIONS

IEEE 802.3 Standard	10BASE-T and 10-BASE2

Wiring Connector	RJ-45 and BNC

Bus Characteristics	32	bits;	PCI	Local	Bus
	Specification 2.0

I/O address	being	assigned by		the BIOS	to
	a free I/O address block

IRQ line	INTA; being assigned by the
	BIOS to a free IRQ(interrupt)
	number

SRAM buffer	16 KB

FCC Compliance	FCC Class B

Power Consumption	2.5W

Operating Temperature	0 to 55 °C

Operating Humidity	10% to 90%, non-condensing

PCB layer	two layers

Image 27

Contents Model DE-528CT Page Limited Warranty Limitation of Liability Page Page Trademarks Page Table of Contents Specifications Cable Specifications Device Drivers Introduction FeaturesGeneral steps to set up/configure a DE-528CT card DE-528CT Ethernet Adapter / User s Guide Page Insert the adapter into an Hardware InstallationNetwork Cable Connections Thin Coaxial Cable Page Software Installation Page Starting the Setup and Diagnostic Program Configuration DiagnosticsConfiguring DE-528CT Boot ROM Installation Page LED Indicators Trouble ShootingPage PCI SpecificationsPage Cable for RJ-45 connector for 10BASE-T network Cable SpecificationsPage Drivers available for the following systems/protocols Device DriversPage DE-528CT Ethernet Adapter / User s Guide Page DE-528CT Ethernet Adapter / User s Guide Page 10/100 Fast Ethernet Switch User s Guide Page Offices Registration Card Would you recommend your D-Link product to a friend?