Motorola VT1000v warranty Basic Configuration

Page 19

VT1000v Series Voice Terminal User Guide

Basic Configuration

To perform basic configuration:

1On the computer connected to the voice terminal PC port, start a web browser such as Microsoft® Internet Explorer or Netscape Navigator®.

2In the Address or Location field, type http://192.168.102.1 and press ENTER to display the Status page, which displays the Motorola voice terminal settings.

3Click Basic Configuration to display the Basic Configuration window. Its fields are:

Obtain IP This setting is enabled by default. If either of the following is true, no

Address configuration on this page is required:

Dynamically ■ If you have a cable modem with no router and your cable provider assigns IP addresses dynamically, the Motorola voice terminal obtains its IP address dynamically from your cable provider.

■If you have a router with DHCP enabled, the Motorola voice terminal obtains its IP address dynamically from your router.

Specify Static If your broadband provider requires a static IP address, enable

IP Address Specify Static IP Address. Type the Static IP Address and IP addresses for the Subnet Mask, Default Gateway they provide.

Enable PPPoE If you have a DSL modem and no router, enable PPPoE and type the Service Name, User Name, and Password provided by your

DSL provider.

13

Page 18 Page 20
Image 19
Page 18 Page 20
Contents User Guide VT1000v Series Voice Terminal FCC Compliance Safety and Regulatory InformationFCC Declaration of Conformity Canadian ComplianceInternational Declaration of Conformity Contents Page VT1000v Series Voice Terminal User Guide IntroductionInternet Sample Configuration Without a Home NetworkMotorola voice terminal Sample Configuration With a Home NetworkType Connects To Front and Rear PanelDescription Before You BeginSigning Up for Service PrecautionsInstallation Installation With a Single Computer VT1000v Series Voice Terminal User Guide Not need to unplug it when not in use Installation With a Home NetworkVT1000v Series Voice Terminal User Guide Connecting a Computer to Display Configuration Pages Basic Configuration Page If you cannot a hear a dial tone, try the following Field or Button Description Advanced ConfigurationChanges. The message This will require a reboot Field Description StatusVT1000v Series Voice Terminal User Guide FieldDescription Help Problem Possible Solutions TroubleshootingContact Information Broadband GlossaryVT1000v Series Voice Terminal User Guide License Software License and WarrantyWarranty Information Visit our website at
Top Page Image Contents