Advanced Configuration
Do not change these settings unless you have the necessary expertise and the need to do so.
Field or Button Description
Enable DHCP/NAT If this is enabled, the Motorola voice terminal automatically distributes
on LAN Port an IP address to a computer connected to its PC port. It is enabled by default.
Virtual Servers Configures logical data ports for applications requiring multiple data ports. Because NAT assumes that data sent through one port will return to the same port, you may need to configure virtual servers to run certain applications:
■IP is the IP address of the computer connected to the Motorola voice terminal
■Port sets the port to open. The ports assigned to Motorola voice terminal voice functions are displayed. If you forward any of these ports, you may disrupt your voice service. The ports shown in the illustration are examples only.
■Transport sets the protocol — Disabled, TCP, IP, or UDP.
16