Motorola SBV5222 manual Setting Up a USB Driver in Windows XP

Introduction

Installation

Troubleshooting Glossary License

Setting Up a USB Driver in Windows XP

1Insert the SURFboard Voice Modem CD-ROM in the CD-ROM drive. This CD contains the USB drivers and must be inserted and read by the PC before you connect the digital voice modem to the PC.

2Connect the digital voice modem to your computer with a USB cable. For further instructions, see “Cabling and Startup for a Single User” on page 10. A few seconds after you complete the USB connection, the Found New Hardware Wizard window is displayed:

3Be sure “Install the software automatically” is selected.

4Click Next. Windows automatically searches for the correct USB drivers and installs them. If the installation is successful, the following window is displayed:

Although your digital voice modem model number may be different than in the images in this guide, the procedure is the same.

5Click Finish to complete the installation. Otherwise, be sure the SURFboard Voice Modem CD-ROM is correctly inserted in your CD-ROM drive.

When you finish setting up the USB driver, you can continue with “Configuring TCP/IP in Windows XP” on page 21.

SBV5222 SURFboard® Digital Voice Modem 16