Introduction Before You Begin
Installation & Configuration
Troubleshooting FAQ Glossary License
To connect a single PC running Microsoft Windows to a SURFboard cable modem, we recommend using the Installation Assistant application.
You can start the Installation Assistant from the Main Menu on the SURFboard Cable Modem
Installation and Configuration Overview
To install and configure your cable modem for a single PC running Microsoft Windows, you can use the Installation Assistant.
Otherwise, to install and configure your cable modem:
1Install the cables as described in one of:
■“Cabling and Startup for a Single User” on page 9
■“Cabling for Multiple Users” on page 33
2If you are using the USB port only, go to “Setting Up a USB Driver” on page 11. Ethernet users can skip this step.
3Configure TCP/IP and verify the IP address for your computer following one of:
■“Configuring TCP/IP” on page 22
■Your Macintosh or UNIX user manual
X | 8 | SURFboard Cable Modem SB4220 Series User Guide |