Introduction Before You Begin
Installation & Configuration
Troubleshooting FAQ Glossary License
Configuring TCP/IP in Windows 95, 98, or Me
The following instructions are for Windows 95, 98 and Me. For Windows 2000 or XP, see “Configuring TCP/IP in Windows 2000 or XP” on page 26. For a Macintosh or UNIX system, refer to your user guide.
1On the Windows Desktop, click Start.
2Select Settings and then Control Panel from the
3
4Select the Configuration tab on the Network window.
5If TCP/IP is displayed in the list of network components, it is installed and you can skip to step 10. If TCP/IP is not displayed on the list, continue with step 6.
Although your SURFboard cable modem model number may be different than in the images in this guide, the procedure is the same.
X
23 | SURFboard Cable Modem SB4220 Series User Guide |