Motorola SB4220 manual Select The updated driver... and click Next

Page 19

Introduction Before You Begin

Installation & Configuration

Troubleshooting FAQ Glossary License

X

Setting Up a USB Driver in Windows 98, continued

8Select The updated driver... and click Next.

If this window is not displayed, verify that the SURFboard Cable Modem CD-ROM is properly inserted in the CD-ROM drive. If you still cannot find the correct driver file, click Cancel to cancel the installation and perform the procedure for “Removing the USB Driver from Windows 98 or Me” on page 38. Then repeat this procedure.

9After the window at bottom left is displayed, click Next.

If a window with the message Copying Files... displays and asks for your CD-ROM drive, type your CD-ROM drive letter (for example, “D:”) and click OK.

If an Insert Disk window similar to the one below is displayed, Windows 98 system files are needed to complete the installation. To install the files, insert your Windows 98 CD-ROM is in the CD-ROM drive and click OK.

Although your SURFboard cable modem model number may be different than in the images in this guide, the procedure is the same.

14	SURFboard Cable Modem SB4220 Series User Guide

Home Print Exit

Image 19

Contents SURFboard Cable Modem SB4220 Series User Guide Home Print Exit Iii Contents Home Print Exit Easier IntroductionKey Light Flashing Top and Front PanelKey Item Description Rear PanelDescription Before You BeginAlways make the wall connection first PrecautionsSigning Up for Service Ethernet Card Computer System RequirementsInstallation and Configuration Overview Cabling and Startup for a Single User Hand-tighten the connectors to avoid damaging themCabling and Startup for a Single User Setting Up a USB Driver Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Select The updated driver... and click Next Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Setting Up a USB Driver in Windows Me Setting Up a USB Driver in Windows XP Configuring TCP/IP Configuring TCP/IP in Windows 95, 98, or Me Configuring TCP/IP in Windows 95, 98, or Me Click Obtain an IP address automatically Configuring TCP/IP in Windows 2000 or XP Configuring TCP/IP in Windows 2000 or XP Configuring TCP/IP in Windows 2000 or XP Configuring TCP/IP in Windows 2000 or XP Verifying the IP Address in Windows 95, 98, or Me Verifying the IP Address in Windows 2000 or XP Verifying the IP Address in Windows 2000 or XP Ethernet and USB Cabling for Multiple UsersCabling for Multiple Users EthernetProblem Possible Solutions TroubleshootingCannot send or receive data Front-Panel Lights and Error Conditions Click the Motorola SurfBoard USB Cable Modem Removing the USB Driver from Windows 98 or MeDisconnect the USB cable from your PC or cable modem Removing the USB Driver from Windows 98 or MeFAQ Glossary License FAQ Glossary License Removing the USB Driver from Windows Click SettingsRemoving the USB Driver from Windows FAQ Glossary License FAQ Glossary License Click Remove Driver Removing the USB Driver from Windows XP Removing the USB Driver from Windows XP FAQ Glossary License FAQ Glossary License FAQ Glossary License FAQ Glossary License Click Remove Driver Contact Us What is high-speed cable Internet access? Frequently Asked QuestionsDo I need to change my Internet service provider ISP? Coaxial cable GlossaryTCP/IP SURFboard Cable Modems Software LicenseHome Print Exit Government Restricted Rights