Adaptec USB2connect Host Bus Adapter manual USB2connect User’s Guide

Page 17

USB2connect User’s Guide

6To verify that the driver is installed under the Universal Serial Bus Host Controller section, right-click My Computer, select Properties, then select the Hardware tab. To open the Device Manager, click the Device Manager button.

USB2.0 unction–see note below

USB1.1 drivers for the USB2conncect

Note: Under the Other devices section, a yellow ! appears before Universal Serial Bus (USB Controller) because at this writing there is no 2.0 driver for the USB2connect. However, the USB 1.1 drivers included with the Windows 2000 system are compatible with USB2connect. For updated driver information, check the Adaptec Web site at http://www.adaptec.com.

12

Image 17

Contents USB2connect Host Bus Adapter Copyright Adaptec Customer Support Iii Regulatory Compliance Statements USB2connect Host Bus Adapter OverviewUSB2connect Driver Information Required Operating Systems Contents of BoxOther Requirements Goal of This GuideInstalling USB2connect Installing USB2connect Windows Me Installing the Windows DriversInstalling the Windows Drivers USB2connect User’s Guide Windows USB2connect User’s Guide Installing the Windows Drivers USB2connect User’s Guide Windows 98 SE Select The updated driver recommended. Click Next Installing the Windows Drivers USB2connect User’s Guide Installing the Windows Drivers Installing the Macintosh Driver Devices Connecting USB DevicesTroubleshooting Troubleshooting