Adaptec USB2connect Host Bus Adapter manual Troubleshooting

Page 25

USB2connect User’s Guide

Troubleshooting

If you have problems while installing USB2connect, check the following:

Note: If you experience any performance issues with your USB device when connected to a hub, connect that device directly to the USB2connect adapter.

Is the adapter seated evenly in the PCI slot?

Is bus mastering support provided and enabled for the PCI slot containing USB2connect? (Check your motherboard documentation for information on this.)

Check the Windows 2000 Event Log if you encounter problems loading the drivers on your Windows 2000 operating system.

Check the troubleshooting section of your operating system user’s guide.

Check the Readme file on the USB2connect CD if you encounter any problems with the software.

If the driver fails to load, move the adapter to a different PCI slot.

For the Power Macintosh system, verify that the adapter is seen by the Apple System Profiler. To verify that the adapter is seen by the Apple System Profiler, follow these steps:

a From the Apple Menu, click Apple System Profiler. b Click the Devices and Volumes tab.

20

Image 25
Contents USB2connect Host Bus Adapter Copyright Adaptec Customer Support Iii Regulatory Compliance Statements USB2connect Host Bus Adapter OverviewUSB2connect Driver Information Required Operating Systems Contents of BoxOther Requirements Goal of This GuideInstalling USB2connect Installing USB2connect Windows Me Installing the Windows DriversInstalling the Windows Drivers USB2connect User’s Guide Windows USB2connect User’s Guide Installing the Windows Drivers USB2connect User’s Guide Windows 98 SE Select The updated driver recommended. Click Next Installing the Windows Drivers USB2connect User’s Guide Installing the Windows Drivers Installing the Macintosh Driver Devices Connecting USB DevicesTroubleshooting Troubleshooting