Adaptec USB2connect Host Bus Adapter manual Contents of Box, Required Operating Systems

Page 8

Overview

Contents of Box

One Adaptec USB2Connect Host Bus Adapter (AUA-3100LP or AUA-5100)

One 10-foot (3-meter), USB 2.0 certified, high-speed cable used to connect USB devices

Hardware Installation Guide

USB2connect Installation CD

Required Operating Systems

Microsoft Windows

Windows 98 SE,

 

Windows 2000, Windows Me

Macintosh

Power Macintosh Beige G3 Rev. B

 

or newer, with Mac OS 9.0.4 and

 

higher

Note: For the latest information on Mac OS X support, see the Readme file on the CD or check the Adaptec Web site at http://www.adaptec.com.

Other Requirements

Available PCI slot (32- or 64-bit, 3.3- or 5-volt compatible)

CD-ROM drive

Note: For Macintosh systems, a Beige Power Macintosh G3 with Rev B. or newer logic board is required.

Goal of This Guide

This guide explains how to install USB2connect into an available PCI slot and verify that USB drivers are installed.

This guide also reviews how to connect the cable to a USB device.

3

Image 8
Contents USB2connect Host Bus Adapter Copyright Adaptec Customer Support Iii Regulatory Compliance Statements Overview USB2connect Host Bus AdapterUSB2connect Driver Information Contents of Box Required Operating SystemsOther Requirements Goal of This GuideInstalling USB2connect Installing USB2connect Installing the Windows Drivers Windows MeInstalling the Windows Drivers USB2connect User’s Guide Windows USB2connect User’s Guide Installing the Windows Drivers USB2connect User’s Guide Windows 98 SE Select The updated driver recommended. Click Next Installing the Windows Drivers USB2connect User’s Guide Installing the Windows Drivers Installing the Macintosh Driver Connecting USB Devices DevicesTroubleshooting Troubleshooting