HARDWARE AND SOFTWARE INSTALLATION
mounting holes
These slots fit over the heads of wall- mounting screws to secure the modem to the wall. A mounting template for marking the location of the mounting screws is included in the foldout Installation Guide that accompanies this manual.
1.Remove the mounting template from the Installation Guide.
2.Place the mounting template against the wall at the location chosen for the cable modem. The template should be parallel to and at least 20 inches (50 cm) from the floor. Insert pushpins through the template cross hairs into the wall to mark the locations for the screws.
3.Secure the mounting screws into the wall. Do not drive the screws flush to the wall. The screw head should be at least ¼” (6 mm) away from the wall so it can lock into the slots on the modem’s case.
4.Fit the slots in the brackets on the modem’s underside over the screw heads and let the modem slide down into position.
12