3Com 2940, 2941 manual Add

BEFORE YOU BEGIN

NOTE: If you need to install a network interface card to give your computer Ethernet capability but have not yet done so, perform this operation first by consulting your NIC installation manual and then return here to complete installation of the TCP/IP software.

1.Click Start, point to Settings, and then click Control Panel.

2.Double-click the Network icon.

3.A list of installed network components appears. Look for an entry that includes TCP/IP ->followed by the NIC hardware device installed in your computer. (The entry for the 3C509B- TPO example is shown in the following screen image).

If an entry similar to this is present, go to step 9 on the next page.

4.If a similar entry is not present, click

Add...

5.Click Protocol, and then click Add...

6.Click Microsoft in the “Manufacturers:” list and then click TCP/IP in the “Network Protocols:” list. Click OK.

7