Self-Test Options Screen
By selecting item 7 from the Main Menu, the Self- Test Options Screen (Figure 19) is presented. From this screen, a self-test for the HTU-C, HTU-R, and HFAC controller can be initiated. To initiate a self- test, press the desired test number followed by a T. Upon completion of the test, results will be presented. These tests are useful in diagnosing suspect hardware and circuits.
NOTE
Momentary communications loss between the HFAC and HTU-C units will occur when the HFAC is first plugged in, or when HFAC self- test is executed. If HFAC communications alarms are not disabled, a momentary alarm may also be generated.
11/23/99 00:26:44 | SHELF ADDRESS = 00 |
SELF-TEST | [ SLOT = 8 ] |
1.INITIATE HTU-C AND HTU-R SELF-TESTS
2.INITIATE HFAC CONTROLLER SELF-TEST
Press : “nnS” to select slot
“nT” to select desired test “M” to return to Main Menu :
Figure 19. Self-Test Options Screen
61221051L1-5A | 61221051L1-5, Issue 1 | 17 |
