3Com 3CR990 manual Windows Drivers, Windows 2000 and installed the NIC, go to in this procedure

Page 27

WINDOWS DRIVERS

4

WINDOWS DRIVERS

Windows 2000	This section describes how to install the network driver and NIC software in a
	PC or server running Windows 2000.
	CAUTION: You must run the Preinstallation program before you install the NIC
	in your PC. If you have already completed the Preinstallation procedure for
	Windows 2000 and installed the NIC, go to step 7 in this procedure.

To install the software:

1Turn the PC power on and insert the EtherCD in the CD-ROM drive. The 3Com EtherCD Welcome screen appears.

If the EtherCD Welcome screen does not appear Go to: EtherCD Navigation.

2Click NIC Software.

The NIC Software screen appears.

3Click Drivers and Diagnostics.

The Drivers and Diagnostics screen appears.

4Click NIC Preinstallation.

5Click NIC Installation with Windows 2000, and then click Done.

When the Preinstallation program is completed, the message “Preinstallation complete” appears.

6Exit the EtherCD installation, shut down the system, turn the PC power off, install the NIC in the PC, and connect the network cable to the NIC and your network port.

For information about installing the NIC in your PC Go to: NIC Installation.

7Turn the PC power on.

The Found New Hardware screen appears, and then the Found New Hardware Wizard starts.

8Click Next.

The Install Hardware Device Drivers screen appears.

9Select Search for a suitable driver for my device (recommended), and then click Next.

The Locate Driver Files screen appears.

Image 27

Contents Published August 3CR990 Family of EtherLink NICsEtherLink 10/100 PCI Network Interface Card with 3XP processor User GuideUNITED STATES GOVERNMENT LEGEND 3Com Corporation5400 Bayfront Plaza Santa Clara, California1 BEFORE YOU BEGIN CONTENTS3 NIC INSTALLATION 2 3CR990 NICSMultiple NICs 4 WINDOWS DRIVERS5 NETWARE DRIVERS 6 IP SECURITYAccessing the 3Com KnowledgeBase 8 CONFIGURATION9 TROUBLESHOOTING 7 UPGRADING DRIVERSB TECHNICAL SUPPORT E MBA BOOT ROMA SPECIFICATIONS D UNINSTALLING NIC SOFTWAREConﬁguring DynamicAccess Technology F DYNAMICACCESS TECHNOLOGYINDEX WARRANTY AND REGULATORY COMPLIANCE INFORMATION DynamicAccess FeaturesPage 2 Click Register Product, and then Register Online BEFORE YOU BEGINGo to Auto Insert Go to Root Subdirectories 1 Right-click the My Computer icon, and then select Properties Minimum System click NIC Software, Drivers and Diagnostics, NIC PreinstallationNIC Installation with Windows 2000, and then Done Go to NIC Installationabout installation diskettes DOS-BootableDiskette Installation to install these driversInstallations \ Diskette.pdf To make installation diskettes NIC Overview 3CR990 NICS168-bit 3DES encryption NIC FeaturesEncryption chip Remote Wake-Up RWU connector 3XP processor 3CR990 NICs support up toRemote Wake-Up cable installed NOTE The 3CR990 NICs provide a network connection with or without theUpgrading software Scanning for viruses Windows Ofﬂoad FeaturesDynamicAccess Technology, and Install 3Com DMI Agent now Ofﬂine DiagnosticsNOTE The default hex value is F all ofﬂoads enabled 2 Click the Local Area Connection icon3 Click Conﬁgure 20 CHAPTER 2 3CR990 NICS For more information NIC INSTALLATIONInstalling the NIC your system22 CHAPTER 3 NIC INSTALLATION Remote Wake-Up Cable Installing the NICL N K 24 CHAPTER 3 NIC INSTALLATIONDATA TX ACTGo to Multiple NICs What do you want to do?Go to Windows Go to Windows Go to Windows NT Go to Windows NT Go to NetWare DriversPage 5 Click NIC Installation with Windows 2000, and then click Done Windows 2000 and installed the NIC, go to step 7 in this procedure3 Click Drivers and Diagnostics 4 Click NIC PreinstallationGo to 3Com DOS Conﬁguration Program Go to New Hardware Found Go to Update Device Driver Wizard NOTE You must restart your computer to complete the installationTo verify that the installation was successful Go to Verifying Successful InstallationGo to Verifying Successful Installation Update Device Driver WizardWindows NT Windows NTPC or server running Windows NT a Select the Enable Automatic DHCP Conﬁguration check box 4 Click Add Adapter6 Click Continue Installation Verifying Successful34 CHAPTER 4 WINDOWS DRIVERS 5 Click NIC Installation with Windows 2000, and then Done Multiple NICsoperating system 36 CHAPTER 4 WINDOWS DRIVERS Windows 95 and5 Click Have Disk Page NOTE 3CR990 NICs do not support NetWare 3.11 and 4.0x servers NETWARE DRIVERSGo to Verifying the PCI Slot Number 4.11, anda Select Reinitialize System For NetWareload c\nwserver\3c99x.lan Verifying the PCI Slot NumberOverview Creating a Security Policy IP SECURITY7 Clear the Activate the default response rule check box 5 Select IP Security Policy Management, and then click Add1 In the left pane, click IP Security Policies on Local Machine Creating a Security Policy Filter Action46 CHAPTER 6 IP SECURITY 2 Select Un-assign8 Click Have Disk UPGRADING DRIVERSGo to Windows 98 and Windows Go to Windows 95 Version A Build7 Click Have Disk 6 Click CloseWindows NT 4.0 50 CHAPTER 7 UPGRADING DRIVERS 6 Click Restart NowCONFIGURATION Provides the ability to boot a PC100BASE-TX 100 Mb/s Conﬁguration If you do not have a DOS-bootable disketteGo to Making a DOS-Bootable Diskette 3Com DOSGo to To Run the Network Test Diagnostics ProgramDiagnostics Program 3Com NIC5 Repeat the process for each setting that you want to change the Installation TROUBLESHOOTINGAccessing the TroubleshootingGo to Technical Support Running DiagnosticsPrograms Go to 10BASE-T Description Go to 100BASE-TX DescriptionConﬁguration Tab For more information about how to make a DOS-bootable diskette4 Click 3Com NIC Doctor General TabAccessing the 3Com Diagnostics TestsDiagnostics Tab Flash Update TabTo run the NIC test, Network test, or Remote Wake-Up test 2 Click Perform NIC Test Go to 3Com NIC Diagnostics Program Accessing 3ComSupport Services Go to Troubleshooting Remote Wake-Up3Com Tray Icon Remote Wake-Upconnection between the NIC and the network Troubleshooting a Network ConnectionNOTE For more information on PCI speciﬁcations and Remote Wake-Up 2 Connect a straight-through cable from the PC to the hub Hardware SPECIFICATIONSNIC Speciﬁcations PCI Local Bus Specification, RevisionNetwork Connection CriteriaNetwork Cable Assignments 1 TD+ 2 TD 3 RD+ 6 RD1 2 3 4 5 6 7 Flow Control Pause FramesLink Negotiation Online Technical ServicesTECHNICAL SUPPORT Register this Product1 847 1 408 727day, 7 days a week Support from 3Com CountryTelephone Number To obtain an RMA number, call or fax NOTE DOS drivers are not supported for 3CR990 NICs. However, they are over-the-network installationsSUPPORTED DRIVERS Additional DriversPage UNINSTALLING NIC SOFTWARE Windows 98 andor Windows 76 APPENDIX D UNINSTALLING NIC SOFTWARE MBA Boot ROM MBA BOOT ROMthe Boot ROM Setting Booting with theNon-BBS MBA boot ROM, see the documentation that came with MBA on the EtherCDFailure to install the patch will result in system failure DYNAMICACCESS TECHNOLOGYDynamicAccess FeaturesTo install DynamicAccess technology InstallingTechnology you install the NIC softwareNOTE You must restart your PC to complete the installation Conﬁguringmanagement tools for an Ethernet network 1 Double-click the Add/Remove Programs icon in the Control Panel Removing2 Select the DAPassThru Driver Transport protocol Page Numbers INDEXuninstalling NIC software 76 unshielded twisted pair UTP OBTAINING WARRANTY SERVICE 3Com Corporation Limited WarrantyWARRANTY AND REGULATORY COMPLIANCE INFORMATION YEAR 2000 WARRANTYGOVERNING LAW Regulatory Compliance InformationLIMITATION OF LIABILITY DISCLAIMERSTATEMENT 3COM END USER SOFTWARE IMPORTANT Read Before Using This ProductINDUSTRY CANADA CLASS B EMISSION COMPLIANCESanta Clara, CA 95052-8145 408 3Com Corporation 5400 Bayfront Plaza P.O. Box