
32CHAPTER 4: WINDOWS DRIVERS
Windows NT 4.0 | This section describes how to install the network driver and NIC software in a PC |
| or server running Windows NT 4.0. |
To install the software:
1Turn the PC power on.
2
3Select the Adapters tab.
If networking has not been previously installed on your system, Windows asks you if you want to install networking. Click Yes.
See the WINNT.TXT file (located in the Help directory on the EtherCD) or your Windows NT documentation for detailed instructions about installing networking.
4Click Add.
The Select Network Adapter screen appears.
5Insert the CD in the
6Make sure that the correct path to your
The Select OEM Option screen appears.
7Make sure that the correct 3Com NIC name is selected, and then click OK.
Files are copied. The Network screen appears with the 3Com NIC name listed in the Network Adapters list box.
8Click Close.
If the Microsoft TCP/IP Properties screen appears, consult your system administrator for further information.
The Network Settings Change screen appears, prompting you to restart your computer.
9Click Yes.
| NOTE: You must restart your computer to complete the installation. |
| The installation is complete. To verify that the driver was successfully installed |
| Go to: Verifying Successful Installation. |
Windows NT 3.51 | This section describes how to install the network driver and NIC software in a |
| PC or server running Windows NT 3.51. |
To install the software:
1Make sure that the NIC is installed in your PC and that it is connected to the network.
2Turn the PC power on.
3In the Main window of the Program Manager,
The Network Settings screen appears.