3Com XL PCI manual If Windows prompts you to reboot, click No

Page 20

3-2CHAPTER 3: INSTALLING THE NETWORK DRIVER

Follow these steps to install the network driver in a PC running Windows 95:

1Install and conﬁgure Windows 95 before installing the 3C905B-TX NIC.

2Install the 3C905B-TX NIC and connect it to the network, as described in Chapter 2.

3Restart the PC.

Windows 95 automatically detects the NIC in the PC.

If Windows 95 does not detect the 3C905B-TX NIC, see Chapter 4,“Troubleshooting.”

4Select Driver from disk provided by the hardware manufacturer and click OK.

5Insert EtherDisk Diskette #2 in your drive and, if the diskette is in drive A, click OK.

Otherwise, supply the correct drive letter and click OK.

Once the 3Com installation ﬁles are read, Windows 95 prompts you for the Windows 95 network installation ﬁles.

6Enter the correct path to the Windows 95 ﬁles (CAB ﬁles) and click OK.

If Windows prompts you to reboot, click No.

7Open the Windows 95 Control Panel.

8In the Control Panel, double-click Network. The Network screen appears.

9For Microsoft networks, select the Conﬁguration tab. For Novell NetWare networks, go to step 10.

The default Microsoft network setup contains the following components:

Client for Microsoft Networks Client for Novell Networks 3Com EtherLink XL Adapter

3Com dRMON SmartAgent PC software IPX/SPX compatible protocol NetBEUI protocol

Image 20

Contents PCI 10/100BASE-TX 3Com Corporation 5400 Bayfront Plaza Santa Clara, California Contents Troubleshooting Specifications Page Figures Tables If you are looking for Turn to About this GuideFinding Speciﬁc Information in This Guide Convention Description ConventionsIcon Description Introduction 13C905B-TX NICDynamicAccess Software Industry-Leading PerformanceInstallation and Conﬁguration Remote Wake-up10/100 Mbps Support PC and Server RequirementsHow Do I Install the 3C905B-TX NIC? 3C905B-TX NICInstalling the NIC Secure the NIC with the screw you removed earlier 1Inserting the NICConnecting to the Network 2Connecting the Network Cable to the RJ-45 PortConnecting the Remote Wake-up Cable Reconnect all cables and replace the PC coverInstalling WindowsIf Windows prompts you to reboot, click No Network components should now include Conﬁrming Installation Click OKClick Yes Click the Device Manager tabUpdating the Network Driver Windows NTWindows NT Version Click Update Installing the Network DriverNetwork Settings window, click Close Click CancelClick Continue Run the Install program. Enter ainstall NetWare for Windows 3.1x, Windows for Workgroups, and DOSAutoLink Requirements Running the AutoLink ProgramInstalling the Novell NetWare Server Driver NetWare VersionAt the A\ prompt, enter nwserver Press Enter to continue the server installationMultiple NICs Supported Network Drivers Network Text File Name Network Driver Name Operating SystemTroubleshooting Status LEDs3Com NIC Diagnostics Program Description Flashing Steady OffAccessing the 3C905B-TX Help System Select 3Com NIC Utilities Select 3Com NIC Diagnostics HelpSelect 3Com NIC Utilities Select 3Com NIC Diagnostics Running the NIC Self-TestEeprom Fifo Running the Echo Test On both PCs3Com Support Services 43Com NIC Diagnostics Program Support ScreenGenerating a Problem Report 5Problem Report Main Screen To exit the program, click Cancel Removing the 3C905B-TX NIC Pace and 3NICDIAGS Software Checking the Remote Wake-up FunctionWindows 95 and Windows NT Windows Control Panel, select Add/Remove ProgramsRemove the PC cover and check the Remote Wake-Up connection 3Com DOS Diagnostic ProgramVerify the driver version Crossover Cable Troubleshooting Tips Connect a straight-through cable from the PC to the hubTroubleshooting Hubs with Crossover Cable Frequently Asked Questions Question AnswerAdd/Remove Programs Question Answer What is a Magic Packet? QuestionAnswerAccessing the 3Com World Wide Web Page Option Default Setting Available Settings Changing ConfigurationConﬁguration Settings Click NIC Details to display the NIC Details screen Displaying Conﬁguration SettingsChanging Conﬁguration Settings Changing Conﬁguration Settings Changing Pace Conﬁguration Selecting Pace ApplicationsChanging Pace Ranges and Protocols Select the protocol that the application usesPace Advanced Options Using the DOS Conﬁguration ProgramSetting Fast IP Specifications SpeciﬁcationsRJ-45 Connector Pin Assignments Figure A-1RJ-45 Connector Pin AssignmentsOnline Technical Services Support from Your Network Supplier3Com Bulletin Board Service Access by Analog ModemWorld Wide Web Site Country Data Rate Telephone Number3ComFacts Automated Fax Service Access by Digital Modem408 654 Country Telephone NumberPage DynamicAccess software GlossaryDRMON Full scatter gatherInﬁnite bursting Network interface card NIC10/100 auto-negotiation NWay Pace technologyIndex NumbersNIC Index Page 3Com Corporation Limited Warranty FCC Class B Statement FCC Declaration of Conformity