Adaptec PC/104, PCM-3420 manual SD0 SD1 SD2

Jumper Block JP4 :

This jumper block is used to set IRQ channel. You must also set the corresponding IC jumper on jumper block 5.

Set IRQ 12	= Jumper 12	Close , Others Open
Set IRQ 11 *	= Jumper 11	Close , Others Open
Set IRQ 10	= Jumper 10	Close , Others Open
Set IRQ 9	= Jumper 9	Close , Others Open (Not
	recommended with Windows 3.x)
(* means default setting)

Jumper Block JP5 :

This jumper block provides four functions eight jumper to set the PCM-3420 host adapter configuration , including SCSI ID , IRQ channel , DMA channel , and parity checking.

JP5 Set PCM-3420 host adapter SCSI ID :

ID	SD0	SD1	SD2
0	Close	Close	Close
1	Open	Close	Close
2	Close	Open	Close
3	Open	Open	Close
4	Close	Close	Open
5	Open	Close	Open
6	Close	Open	Open
7 *	Open	Open	Open
(* means default setting)

JP5 Set PCM-3420 host adapter IRQ Channel :

IRQ

IC0 IC1

9 Close Close (JP4/IRQ 9 also set close)

Chapter 2 Hardware Installation 13