Windows/Windows for Workgroups 3.1x
1.Install Windows 3.1x or Windows for Workgroups 3.1x and start it running on your computer.
2.Insert the
3.Select File/Run from the Program Manager menu.
4.When the Run dialog box appear, type a:\setup if you are using the A drive or b:\setup if you are using the B drive. Then click OK.
5.Following the instructions that appear on the screen.
DOS
1.Install DOS 6.x or above ,and start it running on your computer.
2.Insert the
3.At the DOS prompt, type a:\dosinst if you are using the A drive or b:\dosinst if you are using the B drive. Then press Enter.
4.Following the instructions that appear on the screen.
Chapter 1 General Information | 21 |