Abocom WU5205 user manual Cxx

Page 28

CXX

Authentication Type: There are four types of authentication modes supported by RaConfig. They are Open, Shared, WPA-PSK and WPA system.

Encryption Type: For Open and Shared authentication mode, the selection of encryption type are None and WEP. For WPA, WPA2, WPA-PSK and WPA2-PSK authentication mode, the encryption type supports both TKIP and AES.

Config Methods: Correspond to the methods the AP supports as an Enrollee for adding external Registrars.

Device Password ID: Indicate the method or identifies the specific password that the selected Registrar intends to use.

Selected Registrar: Indicate if the user has recently activated a Registrar to add an Enrollee. The values are "TRUE" and "FALSE".

State: The current configuration state on AP. The values are "Unconfigured" and "Configured".

Version: WPS specified version.

AP Setup Locked: Indicate if AP has entered a setup locked state.

UUID-E: The universally unique identifier (UUID) element generated by the Enrollee. There is a value. It is 16 bytes.

RF Bands: Indicate all RF bands available on the AP. A dual-band AP must provide it. The values are "2.4GHz".

Close: Click this button to exit the information screen.

- 22 -

Image 28
Contents 802.11 b/g/n Micro Mini Wireless LAN USB2.0 Adapter Federal Communication Commission Interference Statement CE Statement Table of Contents Utility Configuration for Windows Vista Soft AP Mode Introduction Windows 2000/XP Installation Configuration Tool Choose to use our configuration utility Page Install the Hardware Windows Vista Installation Page Verification Network Connection Utility Configuration for Windows 2000/XP Profile Profile TabProfile Name SsidSystem Configuration tab Page Authentication and Security tab Page 802.1x tab EAP Method Tunnel Authentication ID\PASSWORD tab Client Certification tab Delete Edit Activate Server Certification tabNetwork Network TabGeneral ConnectWPS CXX Link Status 802.11nStatus Link Status TabExtra Info Advanced Advanced Tab Transmit StatisticsCTS WMM / QoS Receive StatisticsWMM Enable WMM- Power Save EnableDirect Link Setup Enable Timeout ValueWPS AP List Apply Tear DownInformation PIN Code Config Mode Detail Rotate Disconnect Export ProfileRadio On/Off DeletePIN PBCAbout Utility Menu List Config ConfigSecurity Setting Use Mac AddressPage Page Access Control Access ControlAccess Policy Access ListPower Saving Mode MAC TableAdd Delete Remove All Apply MAC TableEvent Log Event LogEvent Time Records the event time Yy/mm/dd-hhmmss Message Transmit Statistics About Utility Configuration for Windows Vista Profile Tab System Configuration tab Page Authentication and Encryption tab Page 802.1x tab EAP Method Tunnel Authentication ID/ Password Identity and password for server Server Certification tab Delete Edit Activate Network Tab Sorted byWPS CXX Link Status Link Status Tab Transmit Receive Link Speed Throughput Enable TCP Window Size Fast Roaming at Apply Transmit Statistics TabReceive Statistics Tab WMM- Power Save Enable Direct Link Setup Enable MAC Address WMM/QoS TabTimeout Value Apply Tear Down WPS TabRescan Information PIN Code Config Mode Detail Connect Rotate Disconnect PIN PBC Export Profile DeleteWPS Associate IE WPS Probe IE Progress Bar Status Bar Utility Menu List AP name of user type. User also can click Use Mac Use Mac Address Security SettingAddress button to display it Page Page Access Control MAC Table Event Log Statistics About Uninstallation for Windows Page Uninstallation for Windows Vista