Abocom WU5205 user manual Advanced Tab

Advanced Tab

Wireless mode

Enable TX Burst

Here supports 2.4G (included 802.11b/g/n) wireless mode.

Check to enable this function. This function enables the adapter to deliver better throughput during a period of time, it only takes effect when connecting with the AP that supports this function.

Enable TCP	Check to increase the transmission quality. The large TCP
Window Size	window size the better performance.
Fast Roaming at	Check to set the roaming interval, fast to roaming, setup
dBm	by transmits power. Default setting is -70dBm.
Show	When you connect AP with authentication, choose
Authentication	whether show "Authentication Status Dialog" or not.
Status Dialog	Authentication Status Dialog displays the process about
	802.1x authentications.
Enable CCX	Check to enable the CCX function.
(Cisco Compatible	•	Turn on CCKM.
extensions)	•	Enable Radio Measurements: Check to enable the
		Radio measurement function.
	• Non-Serving Measurements limit: User can set channel
		measurement every 0~2000 milliseconds. Default is set
		to 250 milliseconds.
		- 26 -