Abocom WU5205 user manual

Page 76

Beacon (ms)

TX Power

Idle time(60-3600)(s)

No forwarding among wireless clients

Hide SSID

Allow BW 40MHz

Default

Apply

WEP Key: Only valid when using WEP encryption algorithm. The key must match with the AP’s key. There are several formats to enter the keys.

Hexadecimal (64bits): 10 Hex characters.

Hexadecimal (128bits): 26 Hex characters.

ASCII (64bits): 5 ASCII characters.

ASCII (128bits): 13 ASCII characters.

Show Password: Check this box to show the password you entered.

The time between two beacons. The system default is 100 ms.

Manually force the AP transmits power from the pull down list 100%, 75%, 50%, 25% and Lowest. The system default is 100%.

It represents that the AP will idle after few seconds. The time must be set between 60~3600 seconds. Default value of idle time is 300 seconds.

No beacon among wireless client, clients can share information each other. The system default is no forwarding.

Do not display AP name. System default no hide.

Click to disable this function. Default is enabling.

Use the system default value.

Click to apply the above settings.

- 70 -

Image 76
Contents 802.11 b/g/n Micro Mini Wireless LAN USB2.0 Adapter Federal Communication Commission Interference Statement CE Statement Table of Contents Utility Configuration for Windows Vista Soft AP Mode Introduction Windows 2000/XP Installation Configuration Tool Choose to use our configuration utility Page Install the Hardware Windows Vista Installation Page Verification Network Connection Utility Configuration for Windows 2000/XP Profile Profile TabProfile Name SsidSystem Configuration tab Page Authentication and Security tab Page 802.1x tab EAP Method Tunnel Authentication ID\PASSWORD tab Client Certification tabDelete Edit Activate Server Certification tabNetwork Network TabGeneral ConnectWPS CXX Link Status 802.11nStatus Link Status TabExtra Info Advanced Advanced Tab Transmit StatisticsCTS WMM / QoS Receive StatisticsWMM Enable WMM- Power Save EnableDirect Link Setup Enable Timeout ValueWPS AP List Apply Tear DownInformation PIN Code Config Mode Detail Rotate Disconnect Export ProfileRadio On/Off DeletePIN PBCAbout Utility Menu List Config ConfigSecurity Setting Use Mac AddressPage Page Access Control Access ControlAccess Policy Access ListPower Saving Mode MAC TableAdd Delete Remove All Apply MAC TableEvent Log Event LogEvent Time Records the event time Yy/mm/dd-hhmmss Message Transmit Statistics About Utility Configuration for Windows Vista Profile Tab System Configuration tab Page Authentication and Encryption tab Page 802.1x tab EAP Method Tunnel Authentication ID/ Password Identity and password for server Server Certification tab Delete Edit Activate Network Tab Sorted byWPS CXX Link Status Link Status Tab Transmit Receive Link Speed Throughput Enable TCP Window Size Fast Roaming at Apply Transmit Statistics TabReceive Statistics Tab WMM- Power Save Enable Direct Link Setup Enable MAC Address WMM/QoS TabTimeout Value Apply Tear Down WPS TabRescan Information PIN Code Config Mode Detail Connect Rotate Disconnect PIN PBC Export Profile DeleteWPS Associate IE WPS Probe IE Progress Bar Status Bar Utility Menu List AP name of user type. User also can click Use Mac Use Mac Address Security SettingAddress button to display it Page Page Access Control MAC Table Event Log Statistics About Uninstallation for Windows Page Uninstallation for Windows Vista