Actiontec electronic GT701 user manual Setting Up Modem, Connecting a Computer to the Modem

Page 10

Setting Up	2
the Modem

The instructions that follow in this chapter parallel the steps contained in the Actiontec Installation Buddy®, which provides a visual, step-by-step guide to setting up the Modem. It is recommended the user run the Installation Buddy first, before attempting any other procedures.

If your Internet Service Provider (ISP) provided a welcome letter or worksheet containing information needed to complete the installation, have it available. If this document was not received, contact the ISP to get the needed information.

☞Note: The following procedures are for US installations. If you live in the UK or another country, the procedures will be slightly different.

Connecting a Computer to the Modem

Connecting a computer to the Modem involves three steps: initial setup, plugging in the power cord, and connecting the Modem to the computer and phone jack.

Connecting Via Ethernet

1.Insert the Installation CD in the CD-ROMdrive of the computer. The Installation Buddy starts automatically. Wait until the following screen appears, read the on-screen instructions, select the country in which you live by clicking in the appropriate check box, then click Next.

7

Image 10

Contents DSL Modem Table of Contents Glossary Firewall Security Level Services Table Setting Up Static IP on the ComputerSpecifications Non-Windows System SetupPackage Contents Introduction1Features Minimum System RequirementsGetting to Know the Modem Internet Light Power LightDSL Light Ethernet LightUSB Port Phone PortPhone port is used to connect the Modem to a phone jack Ethernet PortPower Port On/Off SwitchReset Button Power port is used to connect the Power cord to the ModemConnecting a Computer to the Modem Setting Up ModemConnecting Via Ethernet Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Installing Phone Filters Remove the phone filters from the clear bag. Click Next Setting Up the Modem USB Click NextNext, go to Setting Up the DSL Connection on the next Setting Up the DSL Connection Setting Up the Modem Installation Buddy checks the configuration of the Modem Modem is successfully configured and ready for usePerforming a Basic Setup Basic SetupPage Performing a Basic Setup Changing the Admin User Name and Password Click Save and Restart at the bottom of the screenAccessing Advanced Setup Using Advanced SetupTo access the Advanced Settings configuration screens WAN IP Address Transparent Bridging PPP Auto Connect Encapsulation PPPoA only Specify a Static IP Address LAN IP Address Dhcp Server Ending IP Address Beginning IP AddressDNS Dynamic or Static Services Blocking DNS ServerWebsite Blocking Remote Management Port ForwardingUsing Advanced Setup DMZ Hosting FirewallDynamic Routing NAT Network Address TranslationStatic Routing Viewing Modem’s Settings StatusPage Routing Table WAN StatusLAN Status Active User ListUsing Utilities Web Activity LogDSL Settings Restore Default SettingsUpgrade Firmware This page left intentionally blank Cannot Use the Internet TroubleshootingTroubleshooting Physical ConnectionsWhich protocols does the Modem support? Frequently Asked QuestionsConnection to the Internet Which connection speeds does the Modem support?How do I find out which IP address my computer is using? Is the Modem flash-upgradeable? How do I do it?What is the valid IP range I can use for my home network? Will my Xbox work with the Modem?Yes, if the application is designed to run over a network How many computers can be connected through the Modem? What is the default username for the Modem?What is NAT and how does it protect my network? Does the Modem function as a firewall?This page left intentionally blank Reference Locating Computer InformationLocating Windows Operating System Files Appendix a Reference Click Search Setting Up Static IP On the Computer Windows 98 SEPage 192.168.0.2 Windows Me Enter the following address in the Subnet mask text boxAppendix B Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Comparing DSL Service with a Dial-Up Modem Computer SecurityComputer Security Modem SecurityWeb Browsers Electronic Security This page left intentionally blank Specifications D GeneralPower, DSL, Internet, Ethernet, USB LED IndicatorsEnvironmental Access Point GlossaryPage Ssid This page left intentionally blank Firewall Security Level Services Table High Security LevelMedium Security Level Low Security LevelService Acronym Definitions Basic Security Level323 Real audio/videoIcmp 120Non-Windows G System Setup ClassicPage Appendix G Non-Windows Setup Page Installation Buddy Settings 100 Modifications Regulatory Compliance NoticesClass B Equipment Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty 103104 Limited Warranty 106 Index 108 Index 110 111 112