Actiontec electronic GT701 user manual LAN IP Address

Page 42

Chapter 4 Using Advanced Setup

The Unnumbered Mode feature automatically configures the appropriate IP rout- ing for the IP Address block. The IP route will bypass NAT, enabling the public IPs to be routed WAN-to-LAN, as well as LAN-to-WAN.

☞Note: The IP Address information should be obtained from the ISP when purchasing a block of public static IP address. Contact the ISP if this information was not received.

VIP Mode - This feature is used in conjunction with Unnumbered Mode. When

VIP Mode is activated, the Modem uses NAT for private IP addressing for the local area network (LAN), allowing both public IP addressing and private IP addressing to be configured to the LAN simultaneously, while the DHCP server is reserved for private IP addressing. All computers using public IP addresses with Unnumbered Mode must have the public IP addresses statically assigned. Enter the static IP address in the text boxes below “Unnumbered IP Address.”

After configuring your settings, click Next, then click Save and Restart to make all changes permanent.

LAN IP Address

Selecting LAN IP Address in the “Configuring the Advanced Settings” screen gen- erates the “LAN IP Address” screen.

The values in the “Device IP Address” and “Device LAN Netmask” text boxes are the IP address and subnet mask of the Modem as seen on the network. These val- ues can be modified for your LAN network, but Actiontec recommends keeping the default factory settings (IP address 192.168.0.1; subnet mask 255.255.255.0).

39

Image 42

Contents DSL Modem Table of Contents Glossary Firewall Security Level Services Table Setting Up Static IP on the ComputerSpecifications Non-Windows System SetupPackage Contents Introduction1Features Minimum System RequirementsGetting to Know the Modem Internet Light Power LightDSL Light Ethernet LightUSB Port Phone PortPhone port is used to connect the Modem to a phone jack Ethernet PortPower Port On/Off SwitchReset Button Power port is used to connect the Power cord to the ModemSetting Up Modem Connecting a Computer to the ModemConnecting Via Ethernet Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Installing Phone Filters Remove the phone filters from the clear bag. Click Next Setting Up the Modem USB Click NextNext, go to Setting Up the DSL Connection on the next Setting Up the DSL Connection Setting Up the Modem Installation Buddy checks the configuration of the Modem Modem is successfully configured and ready for usePerforming a Basic Setup Basic SetupPage Performing a Basic Setup Changing the Admin User Name and Password Click Save and Restart at the bottom of the screenUsing Advanced Setup Accessing Advanced SetupTo access the Advanced Settings configuration screens WAN IP Address Transparent Bridging PPP Auto Connect Encapsulation PPPoA only Specify a Static IP Address LAN IP Address Dhcp Server Beginning IP Address Ending IP AddressDNS Dynamic or Static Services Blocking DNS ServerWebsite Blocking Remote Management Port ForwardingUsing Advanced Setup DMZ Hosting FirewallDynamic Routing NAT Network Address TranslationStatic Routing Viewing Modem’s Settings StatusPage Routing Table WAN StatusLAN Status Active User ListUsing Utilities Web Activity LogDSL Settings Restore Default SettingsUpgrade Firmware This page left intentionally blank Cannot Use the Internet TroubleshootingTroubleshooting Physical ConnectionsWhich protocols does the Modem support? Frequently Asked QuestionsConnection to the Internet Which connection speeds does the Modem support?How do I find out which IP address my computer is using? Is the Modem flash-upgradeable? How do I do it?What is the valid IP range I can use for my home network? Will my Xbox work with the Modem?Yes, if the application is designed to run over a network How many computers can be connected through the Modem? What is the default username for the Modem?What is NAT and how does it protect my network? Does the Modem function as a firewall?This page left intentionally blank Reference Locating Computer InformationLocating Windows Operating System Files Appendix a Reference Click Search Setting Up Static IP On the Computer Windows 98 SEPage 192.168.0.2 Windows Me Enter the following address in the Subnet mask text boxAppendix B Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Comparing DSL Service with a Dial-Up Modem Computer SecurityModem Security Computer SecurityWeb Browsers Electronic Security This page left intentionally blank Specifications D GeneralLED Indicators Power, DSL, Internet, Ethernet, USBEnvironmental Access Point GlossaryPage Ssid This page left intentionally blank Firewall Security Level Services Table High Security LevelMedium Security Level Low Security LevelService Acronym Definitions Basic Security Level323 Real audio/videoIcmp 120Non-Windows G System Setup ClassicPage Appendix G Non-Windows Setup Page Installation Buddy Settings 100 Regulatory Compliance Notices ModificationsClass B Equipment Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty 103104 Limited Warranty 106 Index 108 Index 110 111 112