Actiontec electronic GT701 Windows XP, Enter the following address in the Subnet mask text box

Page 80

Appendix B Setting Up Static IP on the Computer

12.Enter the following address in the “Subnet mask” text box:

255.255.255.0

Enter the periods in the address by pressing the space bar on the keyboard.

13.Click OK. The “Internet Protocol (TCP/IP) Properties” window disappears.

14In the “Local Area Connection Properties” window, click OK. The Local Area Connection Properties window disappears.

15.Click Close in the Local Area Connection Status window. The window disappears.

16.Close the Network and Dial-up Connections window by clicking on the “x” button at the upper right corner of the window.

The computer is now set up with a static IP address, allowing access to the Modem’s Web Configuration Utility.

Windows XP

1.From the desktop, click on the Start button in the lower left corner.

2.From the menu that appears, select Control Panel.

77

Image 80

Contents DSL Modem Table of Contents Setting Up Static IP on the Computer SpecificationsGlossary Firewall Security Level Services Table Non-Windows System SetupPackage Contents Introduction1Features Minimum System RequirementsGetting to Know the Modem Power Light DSL LightInternet Light Ethernet LightPhone Port Phone port is used to connect the Modem to a phone jackUSB Port Ethernet PortOn/Off Switch Reset ButtonPower Port Power port is used to connect the Power cord to the ModemConnecting Via Ethernet Setting Up ModemConnecting a Computer to the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Setting Up the Modem Page Installing Phone Filters Remove the phone filters from the clear bag. Click Next Setting Up the Modem USB Click NextNext, go to Setting Up the DSL Connection on the next Setting Up the DSL Connection Setting Up the Modem Installation Buddy checks the configuration of the Modem Modem is successfully configured and ready for usePerforming a Basic Setup Basic SetupPage Performing a Basic Setup Changing the Admin User Name and Password Click Save and Restart at the bottom of the screenTo access the Advanced Settings configuration screens Using Advanced SetupAccessing Advanced Setup WAN IP Address Transparent Bridging PPP Auto Connect Encapsulation PPPoA only Specify a Static IP Address LAN IP Address Dhcp Server DNS Dynamic or Static Beginning IP AddressEnding IP Address Services Blocking DNS ServerWebsite Blocking Remote Management Port ForwardingUsing Advanced Setup DMZ Hosting FirewallDynamic Routing NAT Network Address TranslationStatic Routing Viewing Modem’s Settings StatusPage Routing Table WAN StatusLAN Status Active User ListUsing Utilities Web Activity LogDSL Settings Restore Default SettingsUpgrade Firmware This page left intentionally blank Troubleshooting TroubleshootingCannot Use the Internet Physical ConnectionsFrequently Asked Questions Connection to the InternetWhich protocols does the Modem support? Which connection speeds does the Modem support?Is the Modem flash-upgradeable? How do I do it? What is the valid IP range I can use for my home network?How do I find out which IP address my computer is using? Will my Xbox work with the Modem?Yes, if the application is designed to run over a network What is the default username for the Modem? What is NAT and how does it protect my network?How many computers can be connected through the Modem? Does the Modem function as a firewall?This page left intentionally blank Reference Locating Computer InformationLocating Windows Operating System Files Appendix a Reference Click Search Setting Up Static IP On the Computer Windows 98 SEPage 192.168.0.2 Windows Me Enter the following address in the Subnet mask text boxAppendix B Setting Up Static IP on the Computer 192.168.0.2 Windows Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Windows XP Page Appendix B Setting Up Static IP on the Computer 192.168.0.2 Comparing DSL Service with a Dial-Up Modem Computer SecurityWeb Browsers Modem SecurityComputer Security Electronic Security This page left intentionally blank Specifications D GeneralEnvironmental LED IndicatorsPower, DSL, Internet, Ethernet, USB Access Point GlossaryPage Ssid This page left intentionally blank Firewall Security Level Services Table High Security LevelMedium Security Level Low Security LevelService Acronym Definitions Basic Security LevelReal audio/video Icmp323 120Non-Windows G System Setup ClassicPage Appendix G Non-Windows Setup Page Installation Buddy Settings 100 Class B Equipment Regulatory Compliance NoticesModifications Miscellaneous Legal Notices All other names are the property of their respective ownersLimited Warranty 103104 Limited Warranty 106 Index 108 Index 110 111 112