Actiontec electronic HPE200AV user manual Connecting the MegaPlug Adapters

Page 10

Chapter 2 Connecting the MegaPlug Adapters

4.When this window appears, click Finish.

5.Repeat for other computers connected to an Adapter.

☞Note: If using a computer running Windows Vista, you may have to click through a “User Account Control” window to install the program.

The MegaPlug Adapters are now connected and ready to use, and the Configuration Utility is loaded on the computers. Go to chapter 3, “Using the Configuration Utility” for information about changing the default configuration settings of the Adapter.

7

Image 10

Contents MegaPlug Ethernet Adapter Table of Contents This page left intentionally blank Package Contents Introduction1Features System RequirementsPower Light Getting to Know the Ethernet AdapterTechnical Support Connecting MegaPlug Adapter Connecting the AdaptersInstalling the Configuration Utility Connecting the MegaPlug Adapters This page left intentionally blank Using Configuration Utility Encryption KeyAbout Troubleshooting TroubleshootingFrequently Asked Questions What’s the transfer speed over the Adapter’s network?How many Adapters do I need to set up a network? This page left intentionally blank Setting Up Static IP Address Windows VistaPage Setting Up Static IP Address Page 192.168.1.2 Windows XP Setting Up Static IP Address 192.168.1.2 Windows Page Setting Up Static IP Address Enter the following numbers in the IP Address text box Setting Up File Printer Sharing File SharingPage Setting Up File and Printer Sharing Page Printer Sharing Page Specifications a GeneralLED Indicators EnvironmentalGlossary Page Regulatory Compliance Notices ModificationsMiscellaneous Legal Notices Limited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty