Actiontec electronic HPE200AV user manual Enter the following numbers in the IP Address text box

Actiontec MegaPlug AV 200 Mbps Ethernet Adapter User Manual

9.The “Internet Protocol (TCP/IP) Properties” window appears.

10.In the General tab, make sure the circle next to “Obtain an IP Address auto- matically” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone.

11.Enter the following numbers in the “IP Address” text box:

192.168.1.2

Press the space bar on the keyboard to add the periods between the numbers.

12.Enter the following numbers in the “Subnet mask” text box:

255.255.255.0

Press the space bar on the keyboard to add the periods between the numbers.

13.Click OK. The “Internet Protocol (TCP/IP) Properties” window disappears.

14In the “Local Area Connection Properties” window, click OK. The Local Area Connection Properties window disappears.

15.Click Close in the Local Area Connection Status window. The window disap- pears.

16.Close the Network and Dial-up Connections window by clicking on the “x” button at the upper right corner of the window.

The computer is now set up with a static IP address.

26