Actiontec electronic HPE200AV user manual Frequently Asked Questions

Actiontec MegaPlug AV 200 Mbps Ethernet Adapter User Manual

sUse the Adapter’s Configuration Utility to detect all other Adapters on the network. Then, plug the Adapters into adjacent sockets. If the Ethernet lights still don’t illuminate, contact technical support.

The Power and Link lights are on, but I can’t access the router/gateway from the computer

sTry plugging the Adapters in different power outlets, preferably closer together.

sMake sure all Adapters on the network are using the same security parameters.

Frequently Asked Questions

What’s the transfer speed over the Adapter’s network?

The Adapter’s network transfer speed is 200 Mbps (maximum) over a standard home power line network.

What’s the estimated range of the Adapter’s network?

Approximately 300 meters (~985 ft.) in wall power lines (one household).

Will the Adapter work in any home?

The Adapter will work in any home with built-in copper wiring. It may not operate in some older homes (pre-1950) with alternate wiring.

Will the Adapter’s network signal pass through circuit breakers?

Yes, the Adapter’s network signal will pass through circuit breakers. It will not, however, pass through power transformers.

Does the Adapter work with a 100 – 240V AC input ?

Yes.

12