Actiontec electronic HPE200AV user manual 192.168.1.2

Actiontec MegaPlug AV 200 Mbps Ethernet Adapter User Manual

7.The “Internet Protocol (TCP/IP) Properties” window appears.

8.In the General tab, make sure the circle next to “Use the following IP Address” is selected. When active, a black dot appears in the circle. If the circle already contains a black dot, leave it alone.

9.Enter the following address in the “IP Address” text box:

192.168.1.2

Enter the periods in the address by pressing the space bar on the keyboard.

10.Enter the following address in the “Subnet mask” text box:

255.255.255.0

Enter the periods in the address by pressing the space bar on the keyboard.

11.Click OK. The Internet Protocol (TCP/IP) Properties window disappears.

12.In the Local Area Connection Properties window, click Close. The Local Area Connection Properties window disappears.

13.Click Close in the Local Area Connection Status window. The window disappears.

14.Close the Network and Dial-up Connections window by clicking on the “x” button at the upper right corner of the window.

The computer is now set up with a static IP address.

22