Actiontec electronic HPE200AV user manual Setting Up Static IP Address, Windows Vista

Page 18

Setting Up Static	5
Setting Up Static
IP Address

To communicate with a MegaPlug Ethernet Adapter from a computer on the net- work, the user may have to switch the IP address settings from DHCP-enabled to static IP, so that the computer and the Adapter are on the same subnet.

To set up static IP on a computer, select the operating system and follow the instructions.

☞Note: The following procedures are based on the Adapter’s factory default IP address. If the Adapter’s IP address has been changed, enter the new IP address when instructed to enter an IP address.

Windows Vista

1.From the desktop, click Start button in the lower left corner.

2.From the menu that appears, select Control Panel.

15

Image 18

Contents MegaPlug Ethernet Adapter Table of Contents This page left intentionally blank Package Contents Introduction1Features System RequirementsPower Light Getting to Know the Ethernet AdapterTechnical Support Connecting MegaPlug Adapter Connecting the AdaptersInstalling the Configuration Utility Connecting the MegaPlug Adapters This page left intentionally blank Using Configuration Utility Encryption KeyAbout Troubleshooting TroubleshootingFrequently Asked Questions What’s the transfer speed over the Adapter’s network?How many Adapters do I need to set up a network? This page left intentionally blank Setting Up Static IP Address Windows VistaPage Setting Up Static IP Address Page 192.168.1.2 Windows XP Setting Up Static IP Address 192.168.1.2 Windows Page Setting Up Static IP Address Enter the following numbers in the IP Address text box Setting Up File Printer Sharing File SharingPage Setting Up File and Printer Sharing Page Printer Sharing Page Specifications a GeneralLED Indicators EnvironmentalGlossary Page Regulatory Compliance Notices ModificationsMiscellaneous Legal Notices Limited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty