Actiontec electronic HPE200AV user manual

Page 33

Actiontec MegaPlug AV 200 Mbps Ethernet Adapter User Manual

4.The “Identification Changes” window appears. In the “Computer Name” text box, type a name different than the other computers on the network.

5.In the “Workgroup” text box, enter the network workgroup name. This is the same on each computer on the network.

6.Click OK.

7.Click OK again.

8.Restart the computer.

30

Image 33

Contents MegaPlug Ethernet Adapter Table of Contents This page left intentionally blank Introduction1 Package ContentsSystem Requirements FeaturesGetting to Know the Ethernet Adapter Power LightTechnical Support Connecting the Adapters Connecting MegaPlug AdapterInstalling the Configuration Utility Connecting the MegaPlug Adapters This page left intentionally blank Encryption Key Using Configuration UtilityAbout Troubleshooting TroubleshootingWhat’s the transfer speed over the Adapter’s network? Frequently Asked QuestionsHow many Adapters do I need to set up a network? This page left intentionally blank Windows Vista Setting Up Static IP AddressPage Setting Up Static IP Address Page 192.168.1.2 Windows XP Setting Up Static IP Address 192.168.1.2 Windows Page Setting Up Static IP Address Enter the following numbers in the IP Address text box File Sharing Setting Up File Printer SharingPage Setting Up File and Printer Sharing Page Printer Sharing Page General Specifications aEnvironmental LED IndicatorsGlossary Page Modifications Regulatory Compliance NoticesMiscellaneous Legal Notices Limited Warranty Actiontec Electronics, Inc North Mary Avenue Sunnyvale, CA Limited Warranty