| \N6 | V.42/MNP/Normal data link |
\Q_ | \Q0 | Turn off flow control |
| \Q1 | XON/XOFF software flow control |
| \Q2 | CTS signal unidirectional hardware flow |
|
| control |
| \Q3 | RTS/CTS signal |
|
| flow control |
| \Q4 | XON/XOFF unidirectionl flow control from |
|
| modem |
\Tn |
| Inactivity timer, where n = 0 to 90 minutes. |
|
| Default is 0 |
\V_ | \V0 | Do not send extended responses |
| \V1 | Send extended response set 1 |
\X_ | \X0 | Process XON/XOFF but don’t pass through |
| \X1 | Process XON/XOFF and pass through |
#CC_ | #CC0 | Caller ID disabled |
| #CC1 | Formatted Caller ID (Date, Time Number) |
| #CC2 | Unformatted Caller ID |
3.6 Fax Class 2 Commands
+FAA=n | Data/Fax auto answer enable. Default is 0 |
+FBOR | Data Bit Order |
+FBUF=? | Buffer Size |
+FBUG | Session Message Reporting Parameter |
+FCIG | Report Remote ID Response, CIG |
+FCFR | Confirmation to Receive Prompt |
+FCLASS | Service Class Identification and Control |
+FCON | Facsimile Connection Response |
+FCR | Capability to Receive |
+FCSI | Report Remote ID Response Called Station |
+FCSIG=n | Local Polling ID String |
+FDCS:<string> Report Session Response | |
+FDCC=n | DCE Fax Capabilities Parameters |
+FDIS:<string> | Report Remote Capabilities Response |
+FDIS=n | Current Session Negotiation |
+FDR | Receive Phase C Data |
+FDT[=]n | Transmit Phase C Data |
+FDTC: | Report Remote Capabilities Response |
+FET: | Post Page Message Response |
+FET=n | End the Page or Document |
+FHNG | Call Termination Status Response |
+FHR: | Report Received HDLC Frame Response |
+FHT: | Report Transmitted HDLC Frame |
10