Adder Technology 1000 manual Standard hotkeys, To select a computer using the on-screen menu

Standard hotkeys

The range of hotkey combinations are as follows:

Note: If your hotkeys have been changed, substitute them for and in the examples given here.

	Selects port 1
	Selects port 2
•	•
•	•
then	Selects port 10

To select a computer using the on-screen menu

1Select the on-screen menu in one of two ways:

•By simultaneously pressing and then releasing , or

•By pressing the middle and right buttons of a three button mouse.

Note: The mouse switching option is usable only if the ‘Mouse Switching’ option is enabled. See Global preferences for more details.

At this point, depending on the security settings and the current log in situation, one of two things will be displayed, either the login screen, or the Selection menu:



Note: When entering multiple digit addresses as above or for even longer cascaded computers,

keep and pressed down until all other numbers have been entered.

Selects the next available port

Selects autoscan mode where each (authorised) port is displayed for a period determined by the administrator. To cancel autoscan mode, simply select any fixed channel using any of the suggested methods.

Switches off the video signal – this will cause a power saving monitor to enter its standby

ADDERVIEW CATx 1000

Computer	Port
Computer 1	01
Computer 2	02
Computer 3	03
Computer 4	04
Computer 5	05
Computer 6	06
Computer 7	07
Computer 8	08
User	Status
ADMIN	SHARED USE
F1-More menus	F3-Find
Esc-Quit	F4-Logout

The Selection Menu – here you can select computers by name.

 

mode. To awaken the monitor, simply select any fixed channel using any of the suggested methods.

Logs out the current user (if security is enabled) or selects port 0 to disable the video signal (if security is disabled).

& , , or	Moves the currently displayed on-screen menu
	around the screen.

2Use the and keys (or the scroll wheel of an IntelliMouse) to highlight the required computer name. Alternatively (for large configurations), press to perform an alphabetical search for a particular port name.

Note: If security has been enabled then only computers to which the current user port has permission will be displayed.

3Press to select the highlighted port.

 



34