Adder Technology 1000 manual User arbitration simultaneous local and remote users

Page 36

To select a computer using mouse buttons

Note: This procedure works only with three-button or IntelliMouse devices and only if the ‘Mouse Switching’ option has been enabled by your administrator.

1Hold down the middle button (or scroll wheel) of the mouse.

2Click the left mouse button to select the next computer port. When the correct port is reached, release the middle button.

Note: If security has been enabled then only computers to which you have permission will be displayed.

To select a computer using mouse buttons – Advanced method

1Select the on-screen menu by pressing the middle and right buttons of a three button mouse.

2Use the scroll wheel to highlight the required computer port.

3Then, select either:

Shared Use - press the left mouse button - This standard method allows other users to view the same computer port. Control of the port is given to one user at a time, on a first-come, first-served basis and is relinquished after a certain period of inactivity.

Escape without selecting a port – press the right mouse button.

User arbitration - simultaneous local and remote users

During operation, if both the local and remote user consoles are both connected and being used, the connected video monitors will both continuously receive the output from the selected host system. Control of the selected host system (and switching operations) is arbitrated by the AdderView CATx 1000 on a first come, first served basis. In the idle state, control is available to both users and their keyboard indicators both show the current Num Lock, etc. conditions of the host system.

At the moment that a key is

pressed or a mouse is moved, the keyboard and mouse of the other user are temporarily locked-out (the video images

remain). The keyboard

indicators of the locked-out user then begin to flash to confirm their status ð

After a period of inactivity (determined by the User

Timeout option in Global Preferences) from the user currently in control, the modules return to their idle condition and re-instate the keyboard indicators of the locked-out user.

   



35

Image 36
Contents AdderView CATx Contents Further information Introduction AdderView CATx 1000 features front and rear Remote user portWhat’s in the box What you may additionally needMounting Single unit rack bracketsDouble unit rack brackets CAM Computer Power System Switch ConnectionsLocal user To connect the local user portCable lengths for remote user locations To connect a remote userComputer system via CAM To connect a computer systemPower in connection To connect the power supplyPower control port To connect and address the switch boxesSwitch Cascading multiple units See alsoTips for successful cascading To connect units in cascadeAddressing computers in a cascade Multiple video head connections Slave AdderView CATxRemote switching control Host computer port/channel Video offConfiguration Overall initial configurationConfiguration menus To access the configuration menuGeneral security and configuration steps Configuration menus layoutTo enable general security To set an Admin passwordAccess to all computers Press Access to no computers Press Registering users edit user listTo create/edit user accounts Registering computers edit computer list To create/edit computer entriesVideo compensation Remote user video compensationTo display a suitable high contrast image If the image controls cannot provide a crisp imageRemote user skew adjustment To apply remote user video compensationTo autoset sharpness X100 modules only Press To use skew adjustment Using the supplied skew patternCreating a skew test pattern To select an autoscan mode AutoscanningTo select an autoscan period To define an autoscan listSaving and restoring configuration settings To transfer configuration settingsTo edit the configuration settings Hints for editingWhat to do if the Admin password has been forgotten To clear a password and restore factory default settingsPower switching configuration Power control sequencesTo configure the power sequences for each host computer To control two or more ports simultaneouslyPerforming upgrades Items required to use the upgrade utilityUpgrading AdderView CATx 1000 units and CAMs To use the KVM Firmware Uploader utilityIssues to consider when performing flash upgrades Local and remote user access To gain access as a local or remote userTo select a computer using hotkeys Selecting a computerTo select a computer using the on-screen menu Standard hotkeysSelection Menu here you can select computers by name To select a computer using mouse buttons To select a computer using mouse buttons Advanced methodUser arbitration simultaneous local and remote users Logging in and out Selecting cascaded computersTo log in to the AdderView CATx To log out from the AdderView CATxTo enable/disable the confirmation box To change banner colours or disable the bannerConfirmation box Reminder bannerPower switching via configuration menu To switch a computer on or offUser preferences and functions Getting assistance US +1 888 275Appendix 1 Configuration menus To access the configuration menusFunctions User Preferences Mouse Switching Autoscan ModeGlobal Preferences Screen SaverSettings 1, 2, 3, 5, 10 Seconds User TimeoutSettings 1, 2, 5, 10, 30 SECONDS, 1, 5, 10 Minutes OSD Dwell TimeSetup Options DDC Source Settings AUTO, LOCAL, REMOTE, Default DDC Refresh Settings AT START, DisabledAdvanced Options FormatCountry Code Settings AUTO, MANUAL, Disabled Default CountryUSB Country Code Appendix 2 Cable and connector specifications AdderView CATx 1000 to power switch cablePower switch to power switch daisy chain cable Warranty Safety informationRadio Frequency Energy European EMC directive 89/336/EECFCC Compliance Statement United States Canadian Department of Communications RFI statementHoe Huat Industrial Building Index 