CyberData VoIP Paging/Loudspeaker Amplifier manual 5Troubleshooting, oSee section

Page 14
5Troubleshooting

5Troubleshooting

1.You receive a voicemail prompt when dialing the identity of the device.

Verify the following:

The identity was created in UC Server and the correct User ID and password are configured on the device o See section 4

The SIP Server address on the device is set to the correct IP Address of UC Server

oSee section 4.2

SIP Registration is enabled on the device

oSee section 4.2

2.You are unable to access the Web interface to configure the paging device.

Verify the following:

Your PC is set to the same address range as the device for first time configuration.

See section 3.1

3.No audio when calling into paging device.

Verify the following:

The volume level is set correctly on the speaker.

12

Objectworld Communications Corp. 308 Legget Drive Ottawa, ON Canada K2K 1Y6 T: 613‐599‐9698 F: 613‐599‐7457 www.objectworld.com

Image 14
Contents CyberData Corporation 2555 Garden Road Configuration GuideVoIP Paging/Loudspeaker Amplifier Monterey, CACOPYRIGHT NOTICE TN086 Configuration GuideCyberData VoIP Paging Amplifier August2007‐2008 Objectworld Communications Corp Table of Contents 1 Introduction 1.1Network Topology 2 Known Integration Issues 3.1PC Network Settings 3 Preparationadmin 3.3Upgrading the firmwareadmin admin4 SIP Configuration 4.1Gathering Information3.Select the Identities tab in the left pane 2.Login as the admin user6.Click SIP Authentication admin 4.2Device Configurationadmin SIP Authenticate ID SIP User IDoSee section 5TroubleshootingoSee section See section