Cisco Systems CTSMX30055K9 H323 Profile 1..1 CallSetup Mode, H323 Profile 1..1 Gatekeeper Address

Page 40

Cisco TelePresence MX Series

Administrator guide

Table of contents

Introduction

Web interface

Advanced settings

Appendices

 

40

 

 

H323 Profile [1..1] CallSetup Mode

The H.323 Call Setup Mode defines whether to use a Gatekeeper or Direct calling when establishing H323 calls.

NOTE: Direct H.323 calls can be made even though the H.323 Call Setup Mode is set to Gatekeeper.

Requires user role: ADMIN

Value space: <Direct/Gatekeeper>

Direct: An IP-address must be used when dialling in order to make the H323 call.

Gatekeeper: The system will use a Gatekeeper to make a H.323 call. When selecting this option the H323 Profile Gatekeeper Address and H323 Profile Gatekeeper Discovery settings must also be configured.

Example: H323 Profile 1 CallSetup Mode: Gatekeeper

H323 Profile [1..1] Gatekeeper Discovery

Determine how the system shall register to a H.323 Gatekeeper.

Requires user role: ADMIN

Value space: <Manual/Auto>

Manual: The system will use a specific Gatekeeper identified by the Gatekeeper's IP-address.

Auto: The system will automatically try to register to any available Gatekeeper. If a Gatekeeper responds to the request sent from the codec within 30 seconds this specific Gatekeeper will be used. This requires that the Gatekeeper is in auto discovery mode as well. If no Gatekeeper responds, the system will not use a Gatekeeper for making H.323 calls and hence an IP-address must be specified manually.

Example: H323 Profile 1 Gatekeeper Discovery: Manual

H323 Profile [1..1] Gatekeeper Address

Enter the IP address of the Gatekeeper. NOTE: Requires the H.323 Call Setup Mode to be set to Gatekeeper and the Gatekeeper Discovery to be set to Manual.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: Only the valid IP address format is accepted. An IP address that contains letters (192.a.2.0) or unvalid IP addresses (192.0.1234.0) will be rejected.

Example: H323 Profile 1 Gatekeeper Address: "192.0.2.0"

H323 Profile [1..1] H323Alias E164

The H.323 Alias E.164 defines the address of the system, according to the numbering plan implemented in the H.323 Gatekeeper. The E.164 alias is equivalent to a telephone number, sometimes combined with access codes.

Requires user role: ADMIN

Value space: <S: 0, 30>

Format: Compact string with a maximum of 30 characters. Valid characters are 0-9, * and #. Example: H323 Profile 1 H323Alias E164: "90550092"

H323 Profile [1..1] H323Alias ID

Lets you specify the H.323 Alias ID which is used to address the system on a H.323 Gatekeeper and will be displayed in the call lists. Example: "firstname.surname@company.com", "My H.323 Alias ID"

Requires user role: ADMIN

Value space: <S: 0, 49>

Format: String with a maximum of 49 characters

Example: H323 Profile 1 H323Alias ID: "firstname.surname@company.com"

H323 Profile [1..1] PortAllocation

The H.323 Port Allocation setting affects the H.245 port numbers used for H.323 call signalling.

Requires user role: ADMIN

Value space: <Dynamic/Static>

Dynamic: The system will allocate which ports to use when opening a TCP connection. The reason for doing this is to avoid using the same ports for subsequent calls, as some firewalls consider this as a sign of attack. When Dynamic is selected, the H.323 ports used are from 11000 to 20999. Once 20999 is reached they restart again at 11000. For RTP and RTCP media data, the system is using UDP ports in the range 2326 to 2487. Each media channel is using two adjacent ports, ie 2330 and 2331 for RTP and RTCP respectively. The ports are automatically selected by the system within the given range. Firewall administrators should not try to deduce which ports are used when, as the allocation schema within the mentioned range may change without any further notice.

Static: When set to Static the ports are given within a static predefined range [5555-6555].

Example: H323 Profile 1 PortAllocation: Dynamic

D14850.02 MX Series Administrator Guide (TC5.0) 2011 NOVEMBER © 2011 Cisco Systems, Inc. All rights reserved.

www.cisco.com

Image 40
Contents Cisco TelePresence MX Series MX300 MX200Table of contents Cisco TelePresence MX SeriesIntroduction Intellectual property rights User documentation Cisco contactsSoftware Products covered in this guideWhat’s new­in this version Software download New features and improvementsSoftware release notes Advanced configuration menu changes Other enhancementsFeatures and benefits Cisco TelePresence MX Series at a glanceCisco TelePresence MX Series Web interface Starting the web interface Connect to the video systemSign Sign outChanging the system/codec password Click your user name Open the Change Password dialog boxSet the new password Enter passwordsInteractive menu Menu availability and user rolesMain menu Open sub-pagesSystem information Login information System informationLog files XML files Changing system settings Advanced configurationSearch functionality Select a wallpaper Selecting a wallpaperUpload a custom wallpaper file Sign in banner Enter the text message An active sign in bannerSharing contents Placing callsCalling someone Address input fieldControlling and monitoring a call Local layout control Select a layoutTaking snapshots Enabling the live snapshot featureMain source Display area Take live snapshots Upgrading the system software Uploading the trusted CA certificates list Certificate managementUploading the SSL certificate Enable secure audit logging Audit certificate listAbout audit logging Upload the audit certificate listUser administration Default user accountSecurity mode About user rolesCreating a new user account Editing user detailsDeactivating a user account Deleting a user accountRestarting the system Advanced settings Overview of the advanced settings Find the IP address of your system Open the web interfaceNetworkServices SSH AllowPublicKey Cisco TelePresence MX Series Audio settings Cameras settings Conference settings Conference 1..1 MicUnmuteOnDisconnect Mode Conference 1..1 DoNotDisturb ModeConference 1..1 Encryption Mode Conference 1..1 DefaultCall ProtocolConference 1..1 VideoBandwidth Mode Conference 1..1 PacketLossResilience ModeConference 1..1 VideoBandwidth MainChannel Weight Conference 1..1 IncomingMultisiteCall ModeH323 settings H323 Profile 1..1 CallSetup Mode H323 Profile 1..1 Gatekeeper DiscoveryH323 Profile 1..1 Gatekeeper Address H323 Profile 1..1 H323Alias E164Network settings Network 1..1 QoS Mode Network 1..1 QoS Diffserv SignallingNetwork 1..1 IPv6 Gateway Network 1..1 IPv6 AssignmentNetwork 1..1 IEEE8021X Mode Network 1..1 IEEE8021X PasswordNetwork 1..1 QoS Diffserv Video Network 1..1 IEEE8021X TlsVerifyNetwork 1..1 TrafficControl Mode Network 1..1 RemoteAccess AllowNetwork 1..1 IEEE8021X Eap Md5 Network 1..1 IEEE8021X Eap TtlsNetworkServices settings NetworkServices Http Mode NetworkServices Https Ocsp ModeNetworkServices Https Mode NetworkServices Https VerifyServerCertificateNetworkServices NTP Address NetworkServices SIP ModeNetworkServices Snmp CommunityName NetworkServices Snmp SystemContactPhonebook settings Provisioning settings RTP settings Security settings SerialPort settings SIP settingsSIP Profile 1..1 DefaultTransport SIP Profile 1..1 TlsVerifySIP Profile 1..1 Outbound SIP Profile 1..1 Proxy 1..4 AddressStandby settings SystemUnit settings Time settings Time TimeFormatTime Zone Time DateFormatUserInterface settings Video settingsVideo Input Source 1..2 CameraControl Mode Video Input Source 1..2 CameraControl CameraIdVideo Input Source 1..2 OptimalDefinition Profile Video Input Source 1..2 OptimalDefinition Threshold60fpsVideo DefaultPresentationSource Video Input Source 1..2 QualityVideo Input DVI 1 Type Video ControlPanel BrightnessVideo OSD Mode Video OSD LoginRequiredVideo Layout LocalLayoutFamily Video Layout RemoteLayoutFamilyVideo Output LCD 1 Resolution Video AllowWebSnapshotsVideo Output LCD 1 MonitorRole Video Output LCD 1 BrightnessExperimental settings Video WallPaperExperimental CapsetFilter Experimental CapsetReductionExperimental CTMSSupport Mode Experimental NetworkServices UPnP ModeExperimental NetworkServices UPnP Timeout Experimental Conference 1..1 ReceiverBasedDownspeedingExperimental SystemUnit CrashReporting Mode Example Experimental SystemUnit CrashReporting Mode OffExperimental SystemUnit CrashReporting URI Example Experimental SystemUnit CrashReporting URIAppendices Setting the Administrator settings menu password Setting the system passwordSetting a root password Downloading the provisioning configuration template Cisco VCS provisioningOptimal definition profiles Optimal definition for systems supporting 1080pClearPath Packet loss resilience Technical specification for MX300/MX200 DVI-ISIP Web interface Advanced settings User documentation on the Cisco web site Document categories
Related manuals
Manual 2 pages 49.92 Kb

CTSMX30055K9 specifications

Cisco Systems has long been recognized as a leader in networking and communication technologies, and the Cisco TelePresence MX300 (CTSMX30055K9) exemplifies the company’s commitment to fostering exceptional video collaboration solutions. The MX300 is particularly designed for medium-sized meeting rooms, making it an ideal choice for enterprises looking to enhance their videoconferencing capabilities.

One of the standout features of the Cisco MX300 is its remarkable video experience. With support for up to 1080p high-definition video at 30 frames per second, users can enjoy crisp and clear visual quality during meetings. This resolution ensures that participants feel as though they are in the same room, regardless of their physical location. The MX300 also includes advanced video processing technology, which helps optimize picture quality even in varying bandwidth conditions.

In terms of audio, the MX300 is equipped with Cisco's intelligent audio technology. It utilizes multiple microphones and smart processing to ensure that all voices in the room are captured clearly, eliminating unwanted background noise. This results in a natural conversational experience, allowing for seamless interactions among participants.

Another significant characteristic of the MX300 is its user-friendly interface. The device comes with a simple remote control and touchscreen capabilities that make it easy for users to initiate calls, share content, and manage meetings. Integration with Cisco's Webex platform further enhances its usability, allowing users to join meetings with just one click.

The MX300 is known for its flexibility and scalability. It can be easily integrated into an existing IT infrastructure, supporting various endpoints and devices, which contributes to a more cohesive video collaboration experience. Additionally, it features interoperability with other video conferencing systems, ensuring that organizations can connect with partners and clients regardless of their technology stack.

Security is another strong suit of the Cisco MX300. The device incorporates robust security protocols, including encryption and secure access controls, safeguarding sensitive information shared during meetings. This emphasis on security is critical for organizations seeking to maintain compliance and protect their data.

Overall, the Cisco TelePresence MX300 (CTSMX30055K9) is a powerful solution for medium-sized meeting rooms, offering high-definition video, intelligent audio processing, and a user-friendly interface. With its flexibility, scalability, and strong security features, the MX300 stands out as an ideal choice for organizations committed to effective communication and collaboration. By enhancing the quality of virtual meetings, Cisco's MX300 continues to play a vital role in transforming the workplace into an environment where ideas can be shared effortlessly, fostering innovation and productivity.