Cisco Systems CTSMX30055K9 Video AllowWebSnapshots, Video Output LCD 1 Resolution, Video Selfview

Page 61

Cisco TelePresence MX Series

Administrator guide

Table of contents

Introduction

Web interface

Advanced settings

Appendices

 

61

 

 

Video AllowWebSnapshots

Allow or disallow that snapshots captured by the video input main source can be displayed in the web interface Call Control page.

NOTE: This feature is disabled by default, and must be enabled from the Touch controller.

Requires user role: ADMIN

Value space: <On/Off>

On: If set to on, a web snapshot can be generated and displayed on the web interface.

Off: The generation of web snapshots is not allowed.

Example: Video AllowWebSnapshots: Off

Video Output LCD [1] Resolution

Set the screen resolution.

Requires user role: ADMIN

Value space: <1920_1080_60>

Range: The screen resolution is 1920 x 1080 60 Hz.

Example: Video Output LCD 1 Resolution: 1920_1080_60

Video Output LCD [1] MonitorRole

Set the LCD monitor role.

It is highly recommended to use the default setting. NOTE: The settings made here will be overruled by the touch controller.

Requires user role: ADMIN

Value space: <First/Second/PresentationOnly/InternalSetup> First: Show main video stream.

Second: Show presentation video stream if active, or other participants.

PresentationOnly: Show presentation video stream if active, and nothing else.

InternalSetup: Internal setup from the touch controller will be used.

Example: Video Output LCD 1 MonitorRole: InternalSetup

Video Output LCD [1] Brightness

Set the brightness level for the monitor.

Requires user role: ADMIN

Value space: <S: 0, 100>

Range: Select a value from 0 to 100.

Example: Video Output LCD 1 Brightness: 50

Video Output LCD [1] Red

Set the Red color level for the monitor.

Requires user role: ADMIN

Value space: <S: 0, 100>

Range: Select a value from 0 to 100.

Example: Video Output LCD 1 Red: 50

Video Output LCD [1] Green

Set the Green color level for the monitor.

Requires user role: ADMIN

Value space: <S: 0, 100>

Range: Select a value from 0 to 100.

Example: Video Output LCD 1 Green: 50

Video Output LCD [1] Blue

Set the Blue color level for the monitor.

Requires user role: ADMIN

Value space: <S: 0, 100>

Range: Select a value from 0 to 100.

Example: Video Output LCD 1 Blue: 50

Video Output Internal [2] MonitorRole

Determine the role of the internal monitor and select where to show the video stream and presentation.

It is highly recommended to use the default setting.

Requires user role: ADMIN

Value space: <First/Second/PresentationOnly>

First: Show the main video stream.

Second: Show presentation video stream if active, or other participants.

PresentationOnly: Show presentation video stream if active, and nothing else.

Example: Video Output Internal 2: First

Video Selfview

Determine if the main video source (selfview) shall be displayed on screen.

Requires user role: USER

Value space: <On/Off>

On: Display selfview on screen.

Off: Do not display selfview on screen.

Example: Video Selfview: On

D14850.02 MX Series Administrator Guide (TC5.0) 2011 NOVEMBER © 2011 Cisco Systems, Inc. All rights reserved.

www.cisco.com

Image 61
Contents MX300 MX200 Cisco TelePresence MX SeriesCisco TelePresence MX Series Table of contentsIntroduction Intellectual property rights Cisco contacts User documentationSoftware Products covered in this guideWhat’s new­in this version Software download New features and improvementsSoftware release notes Other enhancements Advanced configuration menu changesCisco TelePresence MX Series at a glance Features and benefitsCisco TelePresence MX Series Web interface Connect to the video system Starting the web interfaceSign Sign outClick your user name Open the Change Password dialog box Changing the system/codec passwordSet the new password Enter passwordsMenu availability and user roles Interactive menuMain menu Open sub-pagesSystem information System information Login informationLog files XML files Changing system settings Advanced configurationSearch functionality Select a wallpaper Selecting a wallpaperUpload a custom wallpaper file Enter the text message An active sign in banner Sign in bannerPlacing calls Sharing contentsCalling someone Address input fieldControlling and monitoring a call Select a layout Local layout controlTaking snapshots Enabling the live snapshot featureMain source Display area Take live snapshots Upgrading the system software Uploading the trusted CA certificates list Certificate managementUploading the SSL certificate Audit certificate list Enable secure audit loggingAbout audit logging Upload the audit certificate listDefault user account User administrationSecurity mode About user rolesEditing user details Creating a new user accountDeactivating a user account Deleting a user accountRestarting the system Advanced settings Find the IP address of your system Open the web interface Overview of the advanced settingsNetworkServices SSH AllowPublicKey Cisco TelePresence MX Series Audio settings Cameras settings Conference settings Conference 1..1 DoNotDisturb Mode Conference 1..1 MicUnmuteOnDisconnect ModeConference 1..1 Encryption Mode Conference 1..1 DefaultCall ProtocolConference 1..1 PacketLossResilience Mode Conference 1..1 VideoBandwidth ModeConference 1..1 VideoBandwidth MainChannel Weight Conference 1..1 IncomingMultisiteCall ModeH323 settings H323 Profile 1..1 Gatekeeper Discovery H323 Profile 1..1 CallSetup ModeH323 Profile 1..1 Gatekeeper Address H323 Profile 1..1 H323Alias E164Network settings Network 1..1 QoS Diffserv Signalling Network 1..1 QoS ModeNetwork 1..1 IPv6 Gateway Network 1..1 IPv6 AssignmentNetwork 1..1 IEEE8021X Password Network 1..1 IEEE8021X ModeNetwork 1..1 QoS Diffserv Video Network 1..1 IEEE8021X TlsVerifyNetwork 1..1 RemoteAccess Allow Network 1..1 TrafficControl ModeNetwork 1..1 IEEE8021X Eap Md5 Network 1..1 IEEE8021X Eap TtlsNetworkServices settings NetworkServices Https Ocsp Mode NetworkServices Http ModeNetworkServices Https Mode NetworkServices Https VerifyServerCertificateNetworkServices SIP Mode NetworkServices NTP AddressNetworkServices Snmp CommunityName NetworkServices Snmp SystemContactPhonebook settings Provisioning settings RTP settings Security settings SIP settings SerialPort settingsSIP Profile 1..1 TlsVerify SIP Profile 1..1 DefaultTransportSIP Profile 1..1 Outbound SIP Profile 1..1 Proxy 1..4 AddressStandby settings SystemUnit settings Time TimeFormat Time settingsTime Zone Time DateFormatVideo settings UserInterface settingsVideo Input Source 1..2 CameraControl CameraId Video Input Source 1..2 CameraControl ModeVideo Input Source 1..2 OptimalDefinition Profile Video Input Source 1..2 OptimalDefinition Threshold60fpsVideo Input Source 1..2 Quality Video DefaultPresentationSourceVideo Input DVI 1 Type Video ControlPanel BrightnessVideo OSD LoginRequired Video OSD ModeVideo Layout LocalLayoutFamily Video Layout RemoteLayoutFamilyVideo AllowWebSnapshots Video Output LCD 1 ResolutionVideo Output LCD 1 MonitorRole Video Output LCD 1 BrightnessVideo WallPaper Experimental settingsExperimental CapsetFilter Experimental CapsetReductionExperimental NetworkServices UPnP Mode Experimental CTMSSupport ModeExperimental NetworkServices UPnP Timeout Experimental Conference 1..1 ReceiverBasedDownspeedingExample Experimental SystemUnit CrashReporting Mode Off Experimental SystemUnit CrashReporting ModeExperimental SystemUnit CrashReporting URI Example Experimental SystemUnit CrashReporting URIAppendices Setting the Administrator settings menu password Setting the system passwordSetting a root password Cisco VCS provisioning Downloading the provisioning configuration templateOptimal definition for systems supporting 1080p Optimal definition profilesClearPath Packet loss resilience DVI-I Technical specification for MX300/MX200SIP Web interface Advanced settings Document categories User documentation on the Cisco web site
Related manuals
Manual 2 pages 49.92 Kb

CTSMX30055K9 specifications

Cisco Systems has long been recognized as a leader in networking and communication technologies, and the Cisco TelePresence MX300 (CTSMX30055K9) exemplifies the company’s commitment to fostering exceptional video collaboration solutions. The MX300 is particularly designed for medium-sized meeting rooms, making it an ideal choice for enterprises looking to enhance their videoconferencing capabilities.

One of the standout features of the Cisco MX300 is its remarkable video experience. With support for up to 1080p high-definition video at 30 frames per second, users can enjoy crisp and clear visual quality during meetings. This resolution ensures that participants feel as though they are in the same room, regardless of their physical location. The MX300 also includes advanced video processing technology, which helps optimize picture quality even in varying bandwidth conditions.

In terms of audio, the MX300 is equipped with Cisco's intelligent audio technology. It utilizes multiple microphones and smart processing to ensure that all voices in the room are captured clearly, eliminating unwanted background noise. This results in a natural conversational experience, allowing for seamless interactions among participants.

Another significant characteristic of the MX300 is its user-friendly interface. The device comes with a simple remote control and touchscreen capabilities that make it easy for users to initiate calls, share content, and manage meetings. Integration with Cisco's Webex platform further enhances its usability, allowing users to join meetings with just one click.

The MX300 is known for its flexibility and scalability. It can be easily integrated into an existing IT infrastructure, supporting various endpoints and devices, which contributes to a more cohesive video collaboration experience. Additionally, it features interoperability with other video conferencing systems, ensuring that organizations can connect with partners and clients regardless of their technology stack.

Security is another strong suit of the Cisco MX300. The device incorporates robust security protocols, including encryption and secure access controls, safeguarding sensitive information shared during meetings. This emphasis on security is critical for organizations seeking to maintain compliance and protect their data.

Overall, the Cisco TelePresence MX300 (CTSMX30055K9) is a powerful solution for medium-sized meeting rooms, offering high-definition video, intelligent audio processing, and a user-friendly interface. With its flexibility, scalability, and strong security features, the MX300 stands out as an ideal choice for organizations committed to effective communication and collaboration. By enhancing the quality of virtual meetings, Cisco's MX300 continues to play a vital role in transforming the workplace into an environment where ideas can be shared effortlessly, fostering innovation and productivity.