Cisco Systems CTSMX30055K9 manual NetworkServices settings

Page 45

Cisco TelePresence MX Series

Administrator guide

Table of contents

Introduction

Network [1..1] VLAN Voice Mode

Set the VLAN voice mode.

Web interface

Advanced settings

Appendices

 

45

 

 

The NetworkServices settings

Requires user role: ADMIN

Value space: <Auto/Manual/Off>

Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled. The VLAN Voice Mode automatically will be set to Auto when the GUI is used to set the Provisioning Mode to CUCM.

Manual: The VLAN id is set manually using the Network VLAN Voice VlanId setting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.

Off: VLAN is not enabled.

Example: Network 1 VLAN Voice Mode: Off

Network [1..1] VLAN Voice VlanId

Set the VLAN voice ID. This setting will only take effect if VLAN Voice Mode is set to Manual.

Requires user role: ADMIN

Value space: <1..4094>

Range: Select a value from 1 to 4094.

Example: Network 1 VLAN Voice VlanId: 1

NetworkServices Multiway Address

The Multiway address must be equal to the Conference Factory Alias, as configured on the Video Communication Server. The Multiway™ conferencing enables video endpoint users to introduce a 3rd party into an existing call.

Multiway™ can be used in the following situations:

1)When you want to add someone else in to your existing call.

2)When you are called by a 3rd party while already in a call and you want to include that person in the call.

Requirements: The Codec C20 must be running TC3.0 (or later), Codec C90/C60/C40 must be running TC4.0 (or later), EX90/EX60/MX200/MX300 must be running TC4.2 (or later), Video Communication Server (VCS) version X5 (or later) and Codian MCU version 3.1 (or later). Endpoints invited to join the Multiway™ conference must support the H.323 routeToMC facility message if in an H.323 call, or SIP REFER message if in a SIP call.

Requires user role: ADMIN

Value space: <S: 0, 255>

Format: String with a maximum of 255 characters.

Example: NetworkServices Multiway Address: "h323:multiway@company.com"

NetworkServices Multiway Protocol

Determine the protocol to be used for Multiway calls. NOTE: Requires a restart of the codec.

Requires user role: ADMIN

Value space: <Auto/H323/Sip>

Auto: The system will select the protocol for Multiway calls.

H323: The H323 protocol will be used for Multiway calls.

Sip: The SIP protocol will be used for Multiway calls.

Example: NetworkServices Multiway Protocol: Auto

NetworkServices H323 Mode

Determine whether the system should be able to place and receive H.323 calls or not. NOTE: Requires a restart of the codec.

Requires user role: ADMIN

Value space: <On/Off>

On: Enable the possibility to place and receive H.323 calls (default).

Off: Disable the possibility to place and receive H.323 calls.

Example: NetworkServices H323 Mode: On

D14850.02 MX Series Administrator Guide (TC5.0) 2011 NOVEMBER © 2011 Cisco Systems, Inc. All rights reserved.

www.cisco.com

Image 45
Contents MX300 MX200 Cisco TelePresence MX SeriesCisco TelePresence MX Series Table of contentsIntroduction Intellectual property rights Cisco contacts User documentationSoftware Products covered in this guideSoftware download New features and improvements What’s new­in this versionSoftware release notes Other enhancements Advanced configuration menu changesCisco TelePresence MX Series at a glance Features and benefitsCisco TelePresence MX Series Web interface Connect to the video system Starting the web interfaceSign Sign outClick your user name Open the Change Password dialog box Changing the system/codec passwordSet the new password Enter passwordsMenu availability and user roles Interactive menuMain menu Open sub-pagesSystem information System information Login informationLog files XML files Advanced configuration Changing system settingsSearch functionality Selecting a wallpaper Select a wallpaperUpload a custom wallpaper file Enter the text message An active sign in banner Sign in bannerPlacing calls Sharing contentsCalling someone Address input fieldControlling and monitoring a call Select a layout Local layout controlEnabling the live snapshot feature Taking snapshotsMain source Display area Take live snapshots Upgrading the system software Certificate management Uploading the trusted CA certificates listUploading the SSL certificate Audit certificate list Enable secure audit loggingAbout audit logging Upload the audit certificate listDefault user account User administrationSecurity mode About user rolesEditing user details Creating a new user accountDeactivating a user account Deleting a user accountRestarting the system Advanced settings Find the IP address of your system Open the web interface Overview of the advanced settingsNetworkServices SSH AllowPublicKey Cisco TelePresence MX Series Audio settings Cameras settings Conference settings Conference 1..1 DoNotDisturb Mode Conference 1..1 MicUnmuteOnDisconnect ModeConference 1..1 Encryption Mode Conference 1..1 DefaultCall ProtocolConference 1..1 PacketLossResilience Mode Conference 1..1 VideoBandwidth ModeConference 1..1 VideoBandwidth MainChannel Weight Conference 1..1 IncomingMultisiteCall ModeH323 settings H323 Profile 1..1 Gatekeeper Discovery H323 Profile 1..1 CallSetup ModeH323 Profile 1..1 Gatekeeper Address H323 Profile 1..1 H323Alias E164Network settings Network 1..1 QoS Diffserv Signalling Network 1..1 QoS ModeNetwork 1..1 IPv6 Gateway Network 1..1 IPv6 AssignmentNetwork 1..1 IEEE8021X Password Network 1..1 IEEE8021X ModeNetwork 1..1 QoS Diffserv Video Network 1..1 IEEE8021X TlsVerifyNetwork 1..1 RemoteAccess Allow Network 1..1 TrafficControl ModeNetwork 1..1 IEEE8021X Eap Md5 Network 1..1 IEEE8021X Eap TtlsNetworkServices settings NetworkServices Https Ocsp Mode NetworkServices Http ModeNetworkServices Https Mode NetworkServices Https VerifyServerCertificateNetworkServices SIP Mode NetworkServices NTP AddressNetworkServices Snmp CommunityName NetworkServices Snmp SystemContactPhonebook settings Provisioning settings RTP settings Security settings SIP settings SerialPort settingsSIP Profile 1..1 TlsVerify SIP Profile 1..1 DefaultTransportSIP Profile 1..1 Outbound SIP Profile 1..1 Proxy 1..4 AddressStandby settings SystemUnit settings Time TimeFormat Time settingsTime Zone Time DateFormatVideo settings UserInterface settingsVideo Input Source 1..2 CameraControl CameraId Video Input Source 1..2 CameraControl ModeVideo Input Source 1..2 OptimalDefinition Profile Video Input Source 1..2 OptimalDefinition Threshold60fpsVideo Input Source 1..2 Quality Video DefaultPresentationSourceVideo Input DVI 1 Type Video ControlPanel BrightnessVideo OSD LoginRequired Video OSD ModeVideo Layout LocalLayoutFamily Video Layout RemoteLayoutFamilyVideo AllowWebSnapshots Video Output LCD 1 ResolutionVideo Output LCD 1 MonitorRole Video Output LCD 1 BrightnessVideo WallPaper Experimental settingsExperimental CapsetFilter Experimental CapsetReductionExperimental NetworkServices UPnP Mode Experimental CTMSSupport ModeExperimental NetworkServices UPnP Timeout Experimental Conference 1..1 ReceiverBasedDownspeedingExample Experimental SystemUnit CrashReporting Mode Off Experimental SystemUnit CrashReporting ModeExperimental SystemUnit CrashReporting URI Example Experimental SystemUnit CrashReporting URIAppendices Setting the system password Setting the Administrator settings menu passwordSetting a root password Cisco VCS provisioning Downloading the provisioning configuration templateOptimal definition for systems supporting 1080p Optimal definition profilesClearPath Packet loss resilience DVI-I Technical specification for MX300/MX200SIP Web interface Advanced settings Document categories User documentation on the Cisco web site
Related manuals
Manual 2 pages 49.92 Kb

CTSMX30055K9 specifications

Cisco Systems has long been recognized as a leader in networking and communication technologies, and the Cisco TelePresence MX300 (CTSMX30055K9) exemplifies the company’s commitment to fostering exceptional video collaboration solutions. The MX300 is particularly designed for medium-sized meeting rooms, making it an ideal choice for enterprises looking to enhance their videoconferencing capabilities.

One of the standout features of the Cisco MX300 is its remarkable video experience. With support for up to 1080p high-definition video at 30 frames per second, users can enjoy crisp and clear visual quality during meetings. This resolution ensures that participants feel as though they are in the same room, regardless of their physical location. The MX300 also includes advanced video processing technology, which helps optimize picture quality even in varying bandwidth conditions.

In terms of audio, the MX300 is equipped with Cisco's intelligent audio technology. It utilizes multiple microphones and smart processing to ensure that all voices in the room are captured clearly, eliminating unwanted background noise. This results in a natural conversational experience, allowing for seamless interactions among participants.

Another significant characteristic of the MX300 is its user-friendly interface. The device comes with a simple remote control and touchscreen capabilities that make it easy for users to initiate calls, share content, and manage meetings. Integration with Cisco's Webex platform further enhances its usability, allowing users to join meetings with just one click.

The MX300 is known for its flexibility and scalability. It can be easily integrated into an existing IT infrastructure, supporting various endpoints and devices, which contributes to a more cohesive video collaboration experience. Additionally, it features interoperability with other video conferencing systems, ensuring that organizations can connect with partners and clients regardless of their technology stack.

Security is another strong suit of the Cisco MX300. The device incorporates robust security protocols, including encryption and secure access controls, safeguarding sensitive information shared during meetings. This emphasis on security is critical for organizations seeking to maintain compliance and protect their data.

Overall, the Cisco TelePresence MX300 (CTSMX30055K9) is a powerful solution for medium-sized meeting rooms, offering high-definition video, intelligent audio processing, and a user-friendly interface. With its flexibility, scalability, and strong security features, the MX300 stands out as an ideal choice for organizations committed to effective communication and collaboration. By enhancing the quality of virtual meetings, Cisco's MX300 continues to play a vital role in transforming the workplace into an environment where ideas can be shared effortlessly, fostering innovation and productivity.