ADIC Version 5.0 manual Configuring, Label Printers

Installing VolServ

Updating the License String

After installation, you may need to update a license string or subsystem configuration. The same utilities invoked by the installation script are used to make these updates; therefore, the procedures (after invoking the utilities) follow those shown in the installation script.

The utility for updating a license string is $VS_DIR/util/change_license.

Step 1. Log in as vsadm.

#su - vsadm

Step 2. Enter the following to run the utility and update the license string:

#$VS_DIR/util/change_license

Configuring	Step 1. To change entries in the printcap file, look for the
Label Printers	device driver filename ttyb in the barcode label
	printer entry and change it to ttya.
	Or, comment-out the entire shelf label printer entry
	with a # at the beginning of the line.
	The following example shows entries added to the
	/etc/printcap file for the shelf label and barcode
	label printers:
	# Seiko Printer:
	#
	shelflabel:\
	:lp=/dev/ttya:sd=/var/spool/lpd:\
	:br#9600:ms=litout,-cstopb,-icrnl:

Post Installation Tasks

601351 Rev A Post Installation Tasks 3-17