ADIC Version 5.0 manual VolServ database Linter is installed under $VSDIR/linter

Page 48

Installing VolServ

------------------------------------------------------------------

Setting VolServ permissions… done.

------------------------------------------------------------------

Step 12. The VolServ database (Linter) is installed under $VS_DIR/linter.

The home directory of the linter database

is /vsdev/volserv/linter. The LINTER_DIR environment variable will be set to this value.

Commencing installation of the VolServ database.

Copying Linter RDBMS files to /vsdev/volserv/linter…

.

.

.

Creating Linter database…

Linter database has been created.

Starting Linter database kernel…

Linter database kernel has been started.

Creating user voldb…

User voldb has been created.

Creating Linter system tables…

Linter system tables have been created.

Creating Linter error messages table…

Linter error messages table has been created.

Loading Linter error messages table…

Linter error messages table has been loaded.

Shutting down Linter database kernel…

Linter database kernel has been shut down.

Setting up necessary tables for database voldb…

Starting Linter database kernel…

Linter database kernel has been started.

2-14

Installation Procedures

601351 Rev A

Image 48

Contents Installing VolServ VolServ Version September Rev aTrademark Notice East Peakview Ave Englewood, CO 80111 USA Phone FAXReader Comment Form Question Circle OnePage Premise of This License Terms Definitions Software LicensePrice Payment Use Copying Transfer RightsADIC’s Warranty Ownership & ProtectionProtections Installation & Acceptance Installation AcceptanceUse & Training ResponsibilityWarranty & Servicing WarrantyWarranty Servicing Maintenance Infringement IndemnificationTermination Correspon- dence Disclaimer Limitation Liability AdicGeneral Entirety Contents Post Installation Tasks Preface Preface Purpose This BookWho Should Read This Book How This Book is OrganizedConventions Conventions used throughout the VolServ technical booksAre listed below Convention ExampleBooks Online BooksRelated PublicationsContact Publications Department Secured Web Site Publications described in the table below are createdStarted Roadmap Topic Refer ToInstallation Prior toTasks below are presented as guidelines only since Actual steps for your specific site are uniqueDirectory Contents VolServ Directory StructureMost cases, changes made to the *.config System Parameters Checklist Information Needed Default Customer EntryCreate VolServ Directories Name Description Path PermissionsConfigure EnvironmentWhere Option DescriptionUsernamepassworduidgidinformationlogindirectoryloginshell Change the /etc/shadow file access mode to Run the passwd command to initialize the vsadm passwordOn Sun, use the following command Obtain VolServ License StringsInstalling VolServ Installation Procedures Installation Procedures Running Installation Script Distribution MediaInstalling VolServ Installation Summary Following steps are required for a successful installationStep Task Refer to Extract Files from CD To start extracting the VolServ files, press Depends on platforms and media typeInstall VolServ VolServ creates the volserv subdirectory Root directory TipInstalling VolServ Parameters Checklist on Installing VolServ Example below, a Scsi library is being installed VolServ database Linter is installed under $VSDIR/linter Procedures Either accept the default path or enter a new pathname Procedures Installing VolServ Post Installation Tasks Post Installation Tasks Post Installation Topics Put LinterStart and Stop Linter As the root user, run startlinter to startTo edit the Linter backup script, follow the steps below Back Up the Database LocationClose all Linter Database processes by running shutlinter Check Pointing DatabaseJournal Database Recovery ManagementSite-Specific Topics Modifying Cshrc FileAdditional tasks include the following topics Cycle vsadm to pick up the changesConfiguring Scsi Device Nodes SGI/IRIX HostHere is an example of the report from hinv Solaris Host Access an OK prompt by simultaneously pressing Edit the /kernel/drv/sgen.conf file as shown BelowThis file to support Adic Media Changers libraries Stop key and the a key from a terminalReboot the Solaris host machine using boot -r to Force re-configuration of hardware devices. This willAt the OK prompt, enter boot to reboot the system Create the device node required for the attachedConfiguring for FileServ Changing Configuration FileChange to the $VSDIR/config subdirectory Edit the appropriate *.config files Config File DescriptionTasks Servers.config Configuring Label PrintersConfigure Printers On SolarisLogin as root Enable Printer Queue Yes Accept Print Jobs Yes Close the admintool windowPost Installation Tasks Installing VolServ Checkpointing -5journaling -5linter -14recovery Update -17volserv -6,1-11Directory -4Linter Database Recovery -6start Changelicense -13,3-17CPU IDAdmintool Administrator userid -6hostname -6license string -6,1-11Bin -4command.config -14config -5console.config Stop