Extreme Networks XFP Modules
2Remove any rubber dust covers from the port where you are installing the XFP module.
On a Summit option card, move the handle to an upright position to access the XFP ports (see Accessing the XFP Ports).
1
Figure 15: Accessing the XFP Ports
3Make sure that the XFP handle (bail latch) is rotated all the way up (see Installing an XFP Module (Summit family switch and BlackDiamond 8800 series switch)).
4Holding the module by its sides, partially insert the XFP module into the XFP port (see Installing an XFP Module (Summit family switch and BlackDiamond 8800 series switch)).
Figure 16: Installing an XFP Module (Summit family switch and BlackDiamond 8800 series switch)
5Slide the XFP module as far as possible into the slot until you hear it click, indicating that it is firmly attached (see Installing an XFP Module (Summit family switch and BlackDiamond 8800 series switch) and Installed XFP Module (Summit family switch and BlackDiamond 8800 series switch)).
Pluggable Hardware Installation Guide | 39 |