Extreme Networks 10018 manual QSFP+ Modules, SR4 QSFP+ Module

3 QSFP+ Modules

QSFP+ Modules

SR4 QSFP+ Module

LR4 QSFP+ Module

Install a QSFP+ Module

Remove a QSFP+ Module

QSFP+ Modules

A QSFP+ module provides four 10-gigabit transmit and receive channels in a single pluggable optical module, for an aggregate bandwidth of 40 Gbps. QSFP+ modules are used in Extreme Networks BlackDiamond and Summit switches.

1

Figure 3: QSFP+ Optical Module (Release Handle)

You can insert or remove QSFP+ modules without powering down the system.

The information in this guide about hardware platform support for QSFP+ modules is current as of the date this guide was published. Support for QSFP+ modules may have been added to other switches or I/O modules besides those listed in this guide. For current information about hardware support and the minimum required software for QSFP+ modules, refer to the most recent version of the ExtremeXOS Hardware and Software Compatibility Matrix.

SR4 QSFP+ Module

The SR4 QSFP+ R4 module provides a 40-Gbps optical connection using MTP® (MPO) optical connectors.

This optical module integrates four data lanes in each direction with 40 Gbps aggregatebandwidth. Each lane can operate at 10.3125 Gbps up to 100 meters using OM3 fiber or upto150meters using OM4 fiber. The SR4 QSFP+ module conforms to the 802.3ba D3.2 (40GBASE-SR4)standard.

The SR4 QSFP+ module is supported in the following Extreme Networks switches and components:

Pluggable Hardware Installation Guide 26