Extreme Networks 10018 manual Prepare to Install or Replace an SFP Module

Page 22

Extreme Networks SFP and SFP+ Modules

10/100/1000BASE-T Copper SFP and Industrial Grade SFP Module

The Extreme Networks 10/100/1000BASE-T copper SFP module is compatible with the Gigabit Ethernet standard and 1000 Base-T standard as specified in the IEEE 802.3ab standard. This SFP module provides a 100-Mbps connection using Category 5 cable.

The 10/100/1000BASE-T copper SFP module operates at a commercial temperature range (0C to 70C). The Industrial Grade 10/100/1000BASE-T copper SFP module operates at a wide temperature range (-40C to 85C).

Note

If the 10/100/1000BASE-T copper SFP GBIC is plugged into a 10G SFP+ port, the GBIC will function only at 1G speeds.

10/100/1000BASE-T SFP module is supported in the following Extreme Networks devices:

•

•

•

•

•

•

•

•

•

•

•

•

BlackDiamond 8800 series switches

Black Diamond X8 series switches

Summit X440 series switches (not supported on combination ports) Summit X450 series switches (not supported on combination ports) Summit X450a series switches (not supported on combination ports) Summit X450e series switches (not supported on combination ports) Summit X460 series switches (not supported on combination ports) Summit X650 series switches

Summit X650-24x switch: ports 1 through 22, VIM1 module ports

Summit X650-24t switch: VIM1 module ports Summit X670-48x and X670V-48x switches

E4G series routers (Ethernet ports; not supported on E4G-400 combination ports)

For technical specifications for the ZR SFP+, see Technical Specifications.

Prepare to Install or Replace an SFP Module

Complete the following tasks before inserting the SFP module:

1Inspect and clean the fiber tips, coupler, and connectors.

2Prepare and clean an external attenuator, if needed.

3When handling fiber cables, take the following precautions to prevent damage to the cables: a Do not stretch the fiber.

b Make sure the bend radius of the fiber is not less than 2 inches (5.08 cm).

4Extreme Networks recommends the following guidelines when installing or replacing SFP modules on an active network:

a Use the same type of SFP module at each end of the link, except for the 1000BASE-BX and 100BSE-BX bi-directional SFP modules. The bi-directional SFP modules include a D-type and a U-type. You must use one D-type SFP and one U-type SFP together to allow for a single fiber bidirectional connection.

b Connect one end of the link to the Tx port. Without an attenuator, measure the total loss from the Tx port to the other site of the link. The total loss must not exceed the total optical system budget.

Pluggable Hardware Installation Guide

22

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Pluggable Hardware Installation Guide Page Table of Contents Appendix B Technical Specifications Text Conventions PrefaceConventions Text ConventionsPlatform-Dependent Conventions Related PublicationsTerminology Providing Feedback to Us Licensing Requirements Optical Interfaces Licensing RequirementsLicensing of Third-Party Optical Modules QSFP+ SR4 QSFP+ LR4 CFP2 SR10 Overview of SFP and SFP+ Modules Extreme Networks SFP and SFP+ ModulesTypes of Optical SFP and SFP+ Interfaces SX and Industrial Grade SX SFP Modules ZR SFP+LX and Industrial Grade LX SFP Modules Optical Budget CalculationZX SFP Module 1000BASE-BX Bi-Directional SFP Modules1100FX SFP Module for Gigabit Ethernet Ports Dual-speed 100FX/1000LX SFP Module LX100 SFP Module100BASE-LX10 SFP Module 100BASE-BX Bi-Directional SFP Modules100FX SFP Module for Fast Ethernet Ports SR SFP+ ModuleER SFP+ Module LR SFP+ ModuleLRM SFP+ Module ZR SFP+ Module Prepare to Install or Replace an SFP Module 10/100/1000BASE-T Copper SFP and Industrial Grade SFP ModuleInstall an SFP Module Optical SFP Module Types and Connectors Copper SFP ModuleRemove an SFP Module Connecting Fiber Cables100FX/1000LX SFP Module QSFP+ Modules QSFP+ ModulesSR4 QSFP+ Module Install a QSFP+ Module LR4 QSFP+ ModuleQSFP+ Modules Remove a QSFP+ Module Removing a QSFP+ ModuleTypes of Direct-Attach Cables Direct-Attach CablesSFP+ Direct-Attach Passive Cable SFP+ Direct-Attach Cables Model Number LengthConnect an SFP+ Direct-Attach Cable Disconnect an SFP+ Direct-Attach Cable Disconnecting an SFP+ Direct-Attach Cable Cable a QSFP+ Direct-Attach CablesQSFP+ Direct-Attach Cables Connect a QSFP+ Direct-Attach CableCable Description Model Number Length Disconnect a QSFP+ Direct-Attach Cable Extreme Networks XFP Modules Overview of XFP ModulesInstall an XFP Module Accessing the XFP Ports Extreme Networks XFP Modules Remove an XFP Module Removing an XFP ModuleExtreme Networks Xenpak Transceivers Overview of Xenpak ModulesSummit Switches BlackDiamond SwitchesSwitch Model Required Software ZR Xenpak Switch Model Required Software Release LW XenpakInstalling and Removing a Xenpak Module LX4 XenpakInstall a Xenpak Module Xenpak ModuleRemove a Xenpak Module CFP2 Overview Extreme Networks CFP2 modulesCFP2 Modules details CFP2 LR4 Module CFP2 SR10 Optical Module Bail latch Open PositionInstalling a CFP2 Module Installing a CFP2 Module CFP2 LR4 module shownInstalled CFP2 Module BlackDiamond X8 series switch Removing a CFP2 ModuleSafety Information Fiber Optic Ports and Optical SafetySicherheitshinweise LWL-Ports und optische SicherheitKonformität von GBIC, SFP Mini-GBIC, QSFP+, Xenpak undXFP SFP Specifications Technical SpecificationsSX SFP Specifications LX SFP Specifications ZX SFP Specifications1000BASE-BX Bi-directional SFP Specifications 100FX SFP GE Ports SpecificationsOperating distance range over each fiber type Dual-speed 100FX/1000LX SFP SpecificationsDual-speed 100FX/1000LX SFP Specifications Parameter 100FX 1000LXLX100 SFP specifications 100BASE-LX10 SFP Specifications100BASE-FX SFP for FE Ports Specifications 100BASE-BX Bi-directional SFP SpecificationsParameter Minimum Maximum SR SFP+ Specifications SFP+ Specifications10/100/1000BASE-T Copper SFP Specifications 10/100/1000BASE-T Copper SFP SpecificationsER SFP+ Specifications LR SFP+ SpecificationsParameter Minimum Typical Maximum Link power budget ZR SFP+ Specifications LRM SFP+ SpecificationsZR SFP+ Specifications LR4 QSFP+Specifications QSFP+ SpecificationsSR4 QSFP+ Specifications LR4 QSFP+ SpecificationsLR XFP Module Specifications XFP SpecificationsReceiver ER XFP Module Specifications SR XFP Module SpecificationsZR XFP Module Specifications Tunable Dwdm XFP Module SpecificationsChannel Wavelength Xenpak Specifications SR Xenpak Module SpecificationsLR Xenpak Module Specifications ER Xenpak Module SpecificationsLX4 Xenpak Module Specifications ZR Xenpak Module SpecificationsGeneral Operating distance range LW Xenpak Module SpecificationsOptical link budget Parameter MeasurementCFP2 Specifications CFP2 SR10 SpecificationsCFP2 LR4 Specifications
Top Page Image Contents