Extreme Networks 10018 manual Install a Xenpak Module

Page 47

Extreme Networks XENPAK Transceivers

This section describes installing and removing the XENPAK module (XENPAK Module). You can install or remove the XENPAK module from your Extreme Networks switch without powering off the system.

Note

On a Summit X450 series, X450a series, or X450e series switch, the XENPAK module is inserted into an optional module card. Although the module card is not hot-swappable, you can hot swap the XENPAK into and out of the module card on the Summit. For information about the optional module card for XENPAKs on a Summit X450 series, X450a series, or X450e series switch, see the Summit Family Switches Hardware Installation Guide.

Card edge connector

Figure 19: XENPAK Module

Warning

XENPAK modules contain Class 1 lasers. Invisible laser radiation can occur when laser connectionsareunplugged. Do not stare into the beam. This device is compliant with FCC 21 CFR 1040.10, andEN60825-1A2:2001.

Caution

To prevent ESD damage to the XENPAK module, always use an appropriately grounded ESD- preventive wrist strap when installing or removing the module. Handle the module by its sides only. Never touch the card-edge connectors at the insertion end of the module.

Install a XENPAK Module

1Remove the XENPAK module from its antistatic container and remove the dust covers from the module optical connectors.

If your module has a protective pad covering the card-edge connector, remove it. Store the antistatic container, dust covers, and card-edge connector protective pad in a clean location from which they can be easily retrieved if you need to uninstall the module.

2Remove any dust covers from the port on the module into which you are installing the XENPAK module.

3Holding the module by its sides, insert the XENPAK module into the slot on the I/O module or Summit option card.

4Slide the XENPAK module as far back into the slot as possible, until you hear it click, indicating that it is firmly attached.

Pluggable Hardware Installation Guide

47

Image 47

Contents Pluggable Hardware Installation Guide Page Table of Contents Appendix B Technical Specifications Text Conventions PrefaceConventions Text ConventionsTerminology Related PublicationsPlatform-Dependent Conventions Providing Feedback to Us Optical Interfaces Licensing Requirements Licensing RequirementsLicensing of Third-Party Optical Modules QSFP+ SR4 QSFP+ LR4 CFP2 SR10 Types of Optical SFP and SFP+ Interfaces Extreme Networks SFP and SFP+ ModulesOverview of SFP and SFP+ Modules ZR SFP+ SX and Industrial Grade SX SFP ModulesOptical Budget Calculation LX and Industrial Grade LX SFP Modules1000BASE-BX Bi-Directional SFP Modules ZX SFP Module1100FX SFP Module for Gigabit Ethernet Ports LX100 SFP Module Dual-speed 100FX/1000LX SFP Module100BASE-BX Bi-Directional SFP Modules 100BASE-LX10 SFP ModuleSR SFP+ Module 100FX SFP Module for Fast Ethernet PortsLRM SFP+ Module LR SFP+ ModuleER SFP+ Module ZR SFP+ Module 10/100/1000BASE-T Copper SFP and Industrial Grade SFP Module Prepare to Install or Replace an SFP ModuleInstall an SFP Module Copper SFP Module Optical SFP Module Types and Connectors100FX/1000LX SFP Module Connecting Fiber CablesRemove an SFP Module SR4 QSFP+ Module QSFP+ ModulesQSFP+ Modules LR4 QSFP+ Module Install a QSFP+ ModuleQSFP+ Modules Removing a QSFP+ Module Remove a QSFP+ ModuleSFP+ Direct-Attach Passive Cable Direct-Attach CablesTypes of Direct-Attach Cables Model Number Length SFP+ Direct-Attach CablesConnect an SFP+ Direct-Attach Cable Disconnect an SFP+ Direct-Attach Cable QSFP+ Direct-Attach Cables Disconnecting an SFP+ Direct-Attach Cable Cable aCable Description Model Number Length Connect a QSFP+ Direct-Attach CableQSFP+ Direct-Attach Cables Disconnect a QSFP+ Direct-Attach Cable Overview of XFP Modules Extreme Networks XFP ModulesInstall an XFP Module Accessing the XFP Ports Extreme Networks XFP Modules Removing an XFP Module Remove an XFP ModuleOverview of Xenpak Modules Extreme Networks Xenpak TransceiversSwitch Model Required Software BlackDiamond SwitchesSummit Switches ZR Xenpak LW Xenpak Switch Model Required Software ReleaseLX4 Xenpak Installing and Removing a Xenpak ModuleXenpak Module Install a Xenpak ModuleRemove a Xenpak Module CFP2 Modules details Extreme Networks CFP2 modulesCFP2 Overview CFP2 SR10 Optical Module Bail latch Open Position CFP2 LR4 ModuleInstalling a CFP2 Module CFP2 LR4 module shown Installing a CFP2 ModuleRemoving a CFP2 Module Installed CFP2 Module BlackDiamond X8 series switchFiber Optic Ports and Optical Safety Safety InformationLWL-Ports und optische Sicherheit SicherheitshinweiseKonformität von GBIC, SFP Mini-GBIC, QSFP+, Xenpak undXFP SX SFP Specifications Technical SpecificationsSFP Specifications ZX SFP Specifications LX SFP Specifications100FX SFP GE Ports Specifications 1000BASE-BX Bi-directional SFP SpecificationsParameter 100FX 1000LX Dual-speed 100FX/1000LX SFP SpecificationsDual-speed 100FX/1000LX SFP Specifications Operating distance range over each fiber type100BASE-LX10 SFP Specifications LX100 SFP specificationsParameter Minimum Maximum 100BASE-BX Bi-directional SFP Specifications100BASE-FX SFP for FE Ports Specifications 10/100/1000BASE-T Copper SFP Specifications SFP+ Specifications10/100/1000BASE-T Copper SFP Specifications SR SFP+ SpecificationsParameter Minimum Typical Maximum Link power budget LR SFP+ SpecificationsER SFP+ Specifications ZR SFP+ Specifications LRM SFP+ SpecificationsZR SFP+ Specifications LR4 QSFP+ Specifications QSFP+ SpecificationsSR4 QSFP+ Specifications LR4 QSFP+SpecificationsReceiver XFP SpecificationsLR XFP Module Specifications SR XFP Module Specifications ER XFP Module SpecificationsTunable Dwdm XFP Module Specifications ZR XFP Module SpecificationsChannel Wavelength SR Xenpak Module Specifications Xenpak SpecificationsER Xenpak Module Specifications LR Xenpak Module SpecificationsGeneral ZR Xenpak Module SpecificationsLX4 Xenpak Module Specifications Parameter Measurement LW Xenpak Module SpecificationsOptical link budget Operating distance rangeCFP2 SR10 Specifications CFP2 SpecificationsCFP2 LR4 Specifications