Extron electronic 68-1021-01 user manual Installation and Operation, Installation Overview

Page 8

Installation and Operation

Installation Overview

To install and set up the IPL M PDP-ES interface card, follow these steps:

1Turn all of the equipment off. Make sure that the Pioneer plasma is turned off and disconnected from its power source.

2Remove the Pioneer communication ES card from the plasma.

3Install the Extron IPL M PDP-ES interface card.

4Attach the LAN and serial cables to the Extron interface card. See Connecting the Hardware in chapter 3.

5Turn on the devices in the following order: serial controller or computer (PC), the switcher or hub, the Pioneer plasma.

6Configure the IP address on the IPL M PDP-ES using ARP commands (see Configuring the Hardware in chapter 3), then access and control the unit using a Web browser.

Installation of the IPL M PDP-ES Interface Card

Within an IPL M PDP-ES compatible plasma are two ES Card Slots in the plasma’s connection panel. These slots are designed to house removable cards that provide communication and enhanced data. The Extron IPL M PDP-ES replaces the Pioneer communication ES card.

Removing the Pioneer communication ES card

Before installing the Extron IPL M PDP-ES interface card, you must remove the Pioneer communication ES card shipped within the plasma. The communication ES card is found in the communication ES Card Slot of the connection panel, as shown below.

Pioneer Plasma Display

Connection Panel

Pioneer ES Card Slot (communication)

Figure 2-1— Pioneer ES Card Slots

To remove the Pioneer communication ES card, do the following:

1.

Ensure that the Pioneer plasma is turned off and

 

disconnected from the power source.

2.

If the plasma display is laid with its screen side facing

 

down, ensure that it is on a flat surface with a blanket or

 

other soft material underneath it.

 

 

Never rest the plasma in such a way that weight or

 

CAUTION

 

 

pressure is placed on the screen surface.

3.

If the plasma display stand blocks the communication ES

 

card slot, remove or slide the stand away from the

 

working area.

4.Remove the two side screws that keep the Pioneer communication ES card in place, and gently pull the center knob toward you to remove the card.

Gently pull the center knob

Figure 2-2 — Removing the Pioneer communication ES card

Installing the Extron IPL M PDP-ES card

To install the Extron IPL M PDP-ES interface card, do the following:

1.Insert the IPL M PDP-ES gently and evenly in between the two rails inside the ES card Slot. Press on the center of the card faceplate to push the card securely into the slot. (See the illustration on the following page).

2-2

IPL M PDP-ES • Installation and Operation

IPL M PDP-ES • Installation and Operation

2-3

Page 7 Page 9
Image 8
Page 7 Page 9
Contents User’s Manual IP Link ToolsFCC Class a Notice PrecautionsExtron’s Warranty Quick Start Guide IPL M PDP-ES Attach the network LAN cable to the LAN portTable of Contents Table of Contents, cont’d IntroductionFeatures IntroductionAbout this Manual About the IPL M PDP-ES Interface CardInstallation and Operation Introduction, cont’dInstallation and Operation Installation OverviewInstallation of the IPL M PDP-ES Interface Card Installing the Extron IPL M PDP-ES cardInstallation and Operation, cont’d Panel Features and CablingPower Ethernet/LAN communicationRS-232 communication Resetting the unitOperation Connection and Configuration ThreeConnection and Configuration Connecting the Hardware Configuring the HardwareConnection and Configuration, cont’d IPL M PDP-ES interface card configurationConfiguring the IPL M PDP-ES using the ARP command Arp -s 10.13.170.15 00-05-A6-00-0A-90Configuring the IPL M PDP-ES using direct PC connection Configuring the IPL M PDP-ES using the RS-232 port192.168.254.253 Esc 10.13.170.15 CIFirmware upgrades Communication and ControlAccessing and using the Web server Navigating the default Web pagesCommunication and Control Communication with the Interface CardIP settings fields Port SettingsEmail Alerts PasswordsCommunication and Control, cont’d Esc 4 SM Firmware upgradeSending an email alert through Telnet To add or update files File Management tabTo create a directory To delete unwanted files or directoriesPower Pioneer tabDisplay Status Display ControlsAdvanced Controls Monitor Energy SaveSchedule Using the command/response table Symbol definitionsCopyright information Password informationError responses Firmware Version/Part Number/Information PortDataBidirectional Serial File Commands IP Setup CommandsPassword and Security Settings Web Browser Specific DirectoriesRe-map port designations Custom Web pages Telnet portTroubleshooting Direct access portIf status is missing or unavailable, check the following Specifications, Part Numbers, and AccessoriesSerial connections Specifications PartsSpecifications, Part Numbers, Accessories, cont’d GlossaryGlossary GlossaryGlossary, cont’d Glossary, cont’d

68-1021-01 specifications

Extron's electronic 68-1021-01 is a versatile and advanced presentation switcher that caters to the growing demands of modern multimedia environments. This device is designed to simplify the process of connecting various audio and video sources to a single output, making it ideal for classrooms, boardrooms, and other professional settings where seamless presentations are essential.

One of the main features of the 68-1021-01 is its ability to handle multiple video formats. It supports HDMI, Composite Video, and RGB inputs, allowing users to connect a diverse range of devices, from laptops and document cameras to legacy equipment. This multi-format capability ensures that users can integrate their existing technology without the need for extensive upgrades.

The switcher's advanced signal processing technology contributes to optimal video quality. It features built-in scaling capabilities, which adjust the resolution of incoming signals to match the output requirements. This ensures that the image quality remains sharp and crisp, regardless of the source, minimizing potential degradation that can occur during format conversions.

Another notable aspect of the Extron 68-1021-01 is its user-friendly interface. It provides an intuitive control mechanism that can be customized to fit the operational preferences of the user. The device can be managed via button inputs, remote controls, or even through third-party control systems, offering flexibility in how users interact with the system.

In addition to video capabilities, the 68-1021-01 is equipped with robust audio management features. It integrates audio switching and processing, which allows users to manage audio signals from various sources seamlessly. This is particularly beneficial in environments where audio clarity is crucial, such as in presentations or video conferences.

The 68-1021-01 utilizes Extron's renowned EDID (Extended Display Identification Data) technology, which helps ensure compatibility between the source and display devices. This feature automatically communicates the display's capabilities, optimizing the connection to reduce the risk of resolution or formatting issues.

Finally, the build quality reflects Extron's commitment to durability and reliability. The device is designed for easy installation, with options for rack mounting or desktop use, and features robust connections to withstand everyday use in busy environments.

Overall, the Extron electronic 68-1021-01 stands out as an efficient and reliable presentation switcher that combines advanced technology with user-friendly design, making it a valuable addition to any modern audiovisual setup.
Top Page Image Contents